Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   BBD Performance (http://www.competitiondiesel.com/forums/forumdisplay.php?f=254)
-   -   Hoses and fittings (http://www.competitiondiesel.com/forums/showthread.php?t=111019)

BBD Performance 04-28-2011 05:53 PM

Hoses and fittings
 
Want to upgrade your fuel lines? Run twin turbos but need that hard to find oil line? Or maybe just want to run some sweet looking stainless hoses with Red, Blue, or Black fittings!

Then you need to call BBD Performance today!

We are now stocking all the popular fittings for Ford, Chevy, and Dodge!

From High PSI Stainless Braided Teflon to Low PSI Single Brade Rubber

We also have the hard to find High PSI BLACK stainless braided!

We carry all the major Manufactures Eaton, Airquip, RHP, and AKTC

Adapters, 90*, 45*, 90* Street, Banjo, SAE, JIC, if it can be screwed together we can do it!

All Hoses are made In-House! BBD can provide you with a full hose or parts to build your own! And as always if you find it cheaper let us know, we will not be beat!

Below 24V to S400
http://i1118.photobucket.com/albums/...-34-56_668.jpg

Below 12V to HT3B
http://i1118.photobucket.com/albums/...-33-50_790.jpg

REW_388 04-28-2011 09:08 PM

Do you need to know measurements or do you pretty well have jigs to go off?? For example I just bought an s475 to do a twin setup on my LB7 and will need oil lines at somepoint

Muddin_dude06 04-28-2011 09:13 PM

What would an oil line cost to go from the 12v's factory oil port to an HE341 mounted in a twin turbo configuration?

BBD Performance 04-28-2011 11:50 PM

Quote:

Originally Posted by REW_388 (Post 1440234)
Do you need to know measurements or do you pretty well have jigs to go off?? For example I just bought an s475 to do a twin setup on my LB7 and will need oil lines at somepoint


I know the S475 but will need to know the other end and I can always send you a few and you can try them out

BBD Performance 04-28-2011 11:53 PM

Quote:

Originally Posted by Muddin_dude06 (Post 1440243)
What would an oil line cost to go from the 12v's factory oil port to an HE341 mounted in a twin turbo configuration?

How long are you needing them to be and do you want to go with any 90's like in the above pics or just straight?

REW_388 04-29-2011 03:16 PM

Well once i get the turbo in ny pocession and start fabbing youll prob hear from me

BBD Performance 04-29-2011 03:51 PM

sounds good man

TRUBBS 05-10-2011 06:36 PM

Can I get a price for a 90* 1/2 push lock fitting, thread size m18x1.5 and just a standard straight push lock 1/2 inch, thread size m14x1.5, and a 90* bulk head fitting?

Also could I get a price on 20ft of 1/2inch fuel hose?

BBD Performance 05-10-2011 09:37 PM

yep give me a few min here and I will

TRUBBS 05-10-2011 11:14 PM

Quote:

Originally Posted by BBD Performance (Post 1450348)
yep give me a few min here and I will

Ok thank you!

TRUBBS 05-12-2011 08:21 AM

Quote:

Originally Posted by TRUBBS (Post 1450170)
Can I get a price for a 90* 1/2 push lock fitting, thread size m18x1.5 and just a standard straight push lock 1/2 inch, thread size m14x1.5, and a 90* bulk head fitting?

Also could I get a price on 20ft of 1/2inch fuel hose?

You have a chance to put together a quote yet?

BBD Performance 05-12-2011 02:26 PM

pm sent

jeff115 05-12-2011 02:52 PM

I would like to run a 1\2" line from my fass to a dual feed at the pump and i don't know the sizes for the fittings or lengths. would you happen to know these? And a price for it too?

TRUBBS 05-12-2011 02:57 PM

Quote:

Originally Posted by jeff115 (Post 1452091)
I would like to run a 1\2" line from my fass to a dual feed at the pump and i don't know the sizes for the fittings or lengths. would you happen to know these? And a price for it too?

The first two fittings I asked about are for dual feeding a p pump, the 45* is for the front plug and the second is for the one on the side

jeff115 05-12-2011 02:59 PM

Well allright then I'll sit back and wait for your answer. My bad

TRUBBS 05-12-2011 03:53 PM

Quote:

Originally Posted by jeff115 (Post 1452095)
Well allright then I'll sit back and wait for your answer. My bad

I wasnt meaning it to come across as rude or anything, I was just saying. Sorry if it sounded like a d!ck remark

BBD Performance 05-12-2011 07:55 PM

pk sent

Muddin_dude06 08-14-2011 10:26 PM

PM'd you

AlmostBroke94 09-15-2011 05:16 PM

soon as i pull my motor i will for sure be giving you guys a call!!


All times are GMT -5. The time now is 06:52 AM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com