Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   Fleece Performance Engineering (http://www.competitiondiesel.com/forums/forumdisplay.php?f=238)
-   -   High Pressure Fuel Lines now available (http://www.competitiondiesel.com/forums/showthread.php?t=191792)

nathan19k 07-14-2016 10:35 AM

High Pressure Fuel Lines now available
 
High Pressure Fuel Line (8mm x 3.5mm Line, M14x1.5 Nuts)

Fabricators and Engine Builders, here are the fuel lines you've been looking for at an affordable price. Don't mess with bending factory lines to fit your custom setup anymore. These lines are OEM quality and give you a blank slate to create a great looking and reliable high pressure fuel system.

http://fleeceperformance.com/high-pr...x1-5-nuts.html

http://fleeceperformance.com/media/c...m/img_3196.jpg

EnduringAtlas 07-14-2016 10:48 AM

How can these lines be formed without kinking? Would a brake line tool work?

nathan19k 07-14-2016 10:51 AM

Quote:

Originally Posted by EnduringAtlas (Post 2565177)
How can these lines be formed without kinking? Would a brake line tool work?

This hand tube bender from Swagelok makes bending easy and look professional : http://www.swagelok.com/en/catalog/P...part=MS-HTB-8M

02Dodge2500HO 07-14-2016 12:37 PM

This is awesome should make building my dual cp3s easier along with your alls new harness

DieselheaD 07-14-2016 01:01 PM

Any chance you guys will come out with high pressure fuel blocks?

JWhite 07-14-2016 01:06 PM

Quote:

Originally Posted by nathan19k (Post 2565178)
This hand tube bender from Swagelok makes bending easy and look professional : http://www.swagelok.com/en/catalog/P...part=MS-HTB-8M

I like Swagelok stuff but that bend radius is a little large.

02Dodge2500HO 07-14-2016 01:16 PM

Quote:

Originally Posted by DieselheaD (Post 2565214)
Any chance you guys will come out with high pressure fuel blocks?



That's was my next question.

DieselheaD 07-14-2016 02:31 PM

Quote:

Originally Posted by 02Dodge2500HO (Post 2565222)
That's was my next question.

They're more than capable with them fancy machines they got.

02Dodge2500HO 07-14-2016 02:43 PM

Quote:

Originally Posted by DieselheaD (Post 2565237)
They're more than capable with them fancy machines they got.



Yeah and I would rather leave the detail sensors on the rail. So a block would be awesome.

DieselheaD 07-14-2016 03:49 PM

I need something simple like this Y fitting into the rail but I need a 3 to 1

https://farm8.staticflickr.com/7453/...0ab6457b_k.jpg

DPC 07-14-2016 09:39 PM

Quote:

Originally Posted by nathan19k (Post 2565178)
This hand tube bender from Swagelok makes bending easy and look professional : http://www.swagelok.com/en/catalog/P...part=MS-HTB-8M

I have this bender and it works awesome! Made it much easier to bend lines for my custom CP3s setup.


All times are GMT -5. The time now is 12:41 PM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com