I like to tinker with my Cummins
I own a 12v and 24v. Both are boringly stock right now. But between Cruel Intentions and myself I believe the 12v is about to get one hell of a makeover.
1993 w250 4x4 5spd bone stock unmolested truck. 2000 24v 4x4 5spd running Edge Juice W/ attitude CTS2. Sent from my iPhone using Tapatalk Pro |
Their are many first gen folks on this forum. Their is enough intelligence on this site to take that first gen of yours to the top.
We just scored this one to help us get into pulling. 1991 W250 3.0 pulling truck - Competition Diesel.Com - Bringing The BEST Together |
Welcome!
Ryan sent you here? Sent from my ASUS_Z01BDC using Tapatalk |
Welcome, is that 93 staying with the Mighty VE?
|
Quote:
Welcome to the op! |
Quote:
Yea Ryan is a friend of mine Sent from my iPhone using Tapatalk Pro |
Quote:
That's the plan! I'd like to have about 500ish hp to the wheels using a set of twins. Planning on making a unique tow rig out of it Sent from my iPhone using Tapatalk Pro |
Quote:
|
Quote:
|
Quote:
Grow a ****ing pair and go pick somthing up |
I like to tinker with my Cummins
https://uploads.tapatalk-cdn.com/201...8383e27235.jpg
I hope I uploaded this picture right. This is the day I hauled it to Ryan's shop to get some work done. The plan for it is a work in progress but here is what I've got so far. It'll get a dually swap (undecided on going with 2nd or 3rd gen axles). Rear will get 4 linked with air springs off of a semi. The G360 is bad so I'm researching a 10 or 13 speed Road Ranger swap and using a divorced NP205 to retain the 4x4. Hopefully we can Fab a custom flatbed with toolboxes that have slide out tool trays. Id like to see it sitting on a set of 19.5" Alcoa's or Forces. I haven't given the engine build much thought but I want to keep the VE and I want a modest set of twins (maybe something old school like an HX35/HT3B set up). She's got potential but funding may be an issue. Only time will tell https://uploads.tapatalk-cdn.com/201...3b0013aecc.jpg Here's the beater. She's reliable and I don't want to play with her too much but I may snag the HX35 off her for the 12v and replace it with a S300 series charger Sent from my iPhone using Tapatalk Pro |
Quote:
Seriously, I go for a surgical consult this Thurs. They say I'll be down 3 months so you could come over and we could play some video games or something. lol |
Quote:
|
You lost me at the 13sp, good luck anyway.
|
Stick to the Dana 80. Unless I've completely missed something, the only thing the 3rd gen rears do is add weight????
I am currently having an 8LL installed in one of my trucks. The 8LL is replacing a very good 10spd. 10spd didn't have low enough gears. Let me see if the 10spd is worth anything. If not, I'll donate it to the cause. |
Quote:
That's kind of where I'm at with the axles. It would be nice to have coil springs in the front but I'm not sure it's worth the extra hassle. If you find out something about that trans holler at me Sent from my iPhone using Tapatalk Pro |
5 5 - 2 2
|
They let anyone on here now huh?
Sent from my iPhone using Tapatalk |
Welcome
|
Quote:
|
All times are GMT -5. The time now is 10:36 PM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com