Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   Super Stock Diesel (http://www.competitiondiesel.com/forums/forumdisplay.php?f=252)
-   -   Looking for a ported Cummins head (http://www.competitiondiesel.com/forums/showthread.php?t=184216)

Dww1999 07-09-2015 12:26 PM

Looking for a ported Cummins head
 
Dropped a valve seat on my current head and I'm looking for something better than stock but not a full race head

Mopar440 07-09-2015 09:37 PM

Probably need to know which head you are wanting 12v, 24v, and etc.

7.7secdiesel 09-25-2015 05:13 PM

If you're wanting a 12v head I have one you'd probably like.

97$moker 09-25-2015 05:18 PM

You should probably put it in the right subforum too...like maybe the looking to buy.

Broaner 02-10-2016 09:54 AM

I know of a 5.9 CR with ZZ Fab and 1mm+ valves.

Insanediesel 03-08-2016 09:58 AM

How much Broaner and what year cr head?

Broaner 03-08-2016 07:45 PM

5.9 CR. So 03-07. No difference between years of 5.9's. I would take $3700 for it. It is fresh. Never been bolted down since it was built up. Built by MHP. Has 103# springs also and fresh everything. Freeze plugs tapped with pipe plugs. Comes with 3.5" boost tube off the zz fab

Insanediesel 03-09-2016 07:59 AM

Quote:

Originally Posted by Broaner (Post 2536168)
5.9 CR. So 03-07. No difference between years of 5.9's. I would take $3700 for it. It is fresh. Never been bolted down since it was built up. Built by MHP. Has 103# springs also and fresh everything. Freeze plugs tapped with pipe plugs. Comes with 3.5" boost tube off the zz fab

Do you have any idea what the cfm flow rate is on the head and who did the work also any pics?

Poulina 04-08-2016 12:33 PM

Aren't there issues with bore size and oversized valves on 5.9 motors? Just was wondering out of curiosity

Broaner 04-08-2016 05:32 PM

Sorry Insane I missed this. I have no flow data. It is MHP work though.

Oversized valves need a .020 overbore on a 5.9 but this is going on a 6.7 so no issue. I would still sell it to free up cash but I'm extremely firm on the price.

Poulina 04-14-2016 05:16 PM

The zz fab plenum would allow the use of a 6.7 fuel rail right? Thinking about this for my '08

Broaner 04-15-2016 12:56 AM

Yes provisions for both rail configurations on the ZZFab

Broaner 05-17-2016 04:31 PM

$3500 shipped. Just had a development on my build and decided I don't need it. Turns out I've been running a 80/83/1.1 as a primary this whole time. Knowing that changes my whole perspective.


All times are GMT -5. The time now is 09:01 AM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com