Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   South Bend Clutch (http://www.competitiondiesel.com/forums/forumdisplay.php?f=195)
-   -   Iron Giant II Install instructions (http://www.competitiondiesel.com/forums/showthread.php?t=136032)

Turbonetics TQ 06-06-2012 01:02 PM

Iron Giant II Install instructions
 
Is there any sort of install instructions for an older Iron Giant II clutch in to a NV5600 ?
Just wondering if the release fork will need to be ground down, and if so where. Also if the pivot ball will need the washer removed or not.

One more question: is the release fork for the NV4500 and NV5600 the same?

Thank you very much!

sb clutch 06-07-2012 12:59 PM

I would say your best bet is to give us a call when you get a chance and we can go over the details and or get you what you need.

Peter
800-988-4345


All times are GMT -5. The time now is 06:09 PM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com