Trans and rearend.
Maybe some one can help me out. Our company has a old 86 gmc top kick with a 3208 cat, eaton 5 speed, and eaton rear. I cant read the tag on the trans and cant really find anything on the rear other than eaton stamped on it. Can anyone help me out on identifying these?
|
Truck originally used to be a sewer vac truck.
|
there were so many different combo's on those trucks that it could be anything.
|
Kinda what I have come up with. I'll have try to inspect it some more when its not snowing and thundering here.
Thanks Sent from the recliner butt naked |
you're best bet is to take the vin number and call a gm dealer that you trust on the parts side with an older guy still working there that might know a little somethign about the older medium duty trucks.
|
The tag is still on the Trans but has been painted over. And i thought the rear was a little big and over kill for the truck.
Sent from the recliner butt naked |
This is what i got off the rear.
Cast into it 107493 Stamped on top of pumpkin 22121 119548 G1883 5 57 Sent from the recliner butt naked |
I'm not coming up with many specs on this rearend. Or i'm looking in the wrong places.
|
the eaton 5spds are a common med duty trans for those, 5th is 1 to 1
|
About the only good info on the rear end I'm coming up with is that it has a 17 ring gear. Not much more info on it. Or could be looking the wrong places. Any info would be greatly appreciated.
Sent from the recliner butt naked |
http://img.tapatalk.com/d/13/04/13/5atanyny.jpg
http://img.tapatalk.com/d/13/04/13/ge8y9ede.jpg Sent from the recliner butt naked |
Take some lacquer thinner and try to free the paint up from the tag for the transmisison.
|
I can try to run those numbers off the axle while I am at work in my spare time, are you able to get a picture of the brake shoes though? preferably the ends where the rollers are sitting. But a pic of the whole shoe roller to roller please.
|
I'll try beginning of next week. Thanks.
Sent from the recliner butt naked |
There should be numbers on the end of the pinion.
Dale |
I'll check. Thanks
Sent from the recliner butt naked |
107495. If they are on the end of pinion shaft I'll have to take drive shaft off.
Sent from the recliner butt naked |
Yes their fairly small
Dale |
Matt
You ever figure anything out?? Is that thing a 2spd?? Also can ya shoot me a pic of the rear of the housing?? Ill compare it to a few trucks we have around the shop. |
Not yet, been busy with work. I'll shoot some more pics this morning. Thanks.
Sent from the recliner butt naked |
All times are GMT -5. The time now is 01:31 PM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com