Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   Custom Fabrication (http://www.competitiondiesel.com/forums/forumdisplay.php?f=245)
-   -   Hey Chassisman : (http://www.competitiondiesel.com/forums/showthread.php?t=201877)

RacinDuallie 01-08-2019 03:48 PM

Hey Chassisman :
 
Please post up some pics of your truck and exhaust system. :poke:

Chassisman 01-08-2019 06:57 PM

Ruh roo, official BS meter is running now. I usually only BS my accountant @ tax time.

RacinDuallie 01-08-2019 07:17 PM

Thru the frame?

RacinDuallie 01-08-2019 07:18 PM

Quote:

Originally Posted by Chassisman (Post 2690616)
Ruh roo, official BS meter is running now. I usually only BS my accountant @ tax time.

No bs to worry about, was interested in how you pulled off the exhaust. Does that Duallie fender get sooted up easily?

Chassisman 01-08-2019 07:32 PM

Quote:

Originally Posted by RacinDuallie (Post 2690618)
Thru the frame?

Over the rail and out...there's plenty room. I used V band clamps to connect them.

Chassisman 01-08-2019 07:34 PM

Quote:

Originally Posted by RacinDuallie (Post 2690620)
No bs to worry about, was interested in how you pulled off the exhaust. Does that Duallie fender get sooted up easily?

YES! I added a short extension to help it get around the fender, and that helped a bunch. It used to be flush with exhaust bezel.

Howling 01-08-2019 07:35 PM

Looks like King coilovers

Sent from my SM-G955U using Tapatalk

Chassisman 01-08-2019 08:04 PM

Quote:

Originally Posted by Howling (Post 2690624)
Looks like King coilovers

Sent from my SM-G955U using Tapatalk

Just Kings with taller towers.

Chassisman 01-08-2019 08:07 PM

The whole thing with the exhaust came about when I 4 linked it with an upper triangle and had to ditch the fuel tank and exhaust.

Chassisman 01-09-2019 12:33 PM

Quote:

Originally Posted by blackmega3500 (Post 2690635)
Gaaawd-dang, and with how my outer fender and duals get sooted up with the pipe at the leading edge of the fender I couldn't imagine running it in closer to the body.

I was originally going to make it exit out the rear of the fender, but the whole idea was to avoid it from hitting a triangulated 4 link suspension so it couldn't go over the axle at all. I thought about doing a Bro Dozer stack through the bed...naaaaa:badidea:

CorneliusRox 01-10-2019 08:41 AM

Where are these pics at?
Or is the avatar the only one?

RacinDuallie 01-11-2019 06:41 AM

Quote:

Originally Posted by CorneliusRox (Post 2690766)
Where are these pics at?
Or is the avatar the only one?

I dunno he had pics posted. :what:

Meyers Farms 01-11-2019 07:23 AM

Quote:

Originally Posted by CorneliusRox (Post 2690766)
Where are these pics at?
Or is the avatar the only one?

I don’t see any pics either.

sootie 01-11-2019 07:34 AM

He removed them...they were there before.

RacinDuallie 01-11-2019 08:34 PM

Now he is ignoring us ......


Wtf

RacinDuallie 01-11-2019 10:29 PM

He was honestly scared you was gonna start posting up your exhaust pics, then go on a roofing commission tirade again.





:hehe: :hehe:


All times are GMT -5. The time now is 06:10 PM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com