Machine work

N

Natelovett

New member
So how much does it cost to get a cr block machined .20 everything lined bore main caps crank cam journal plus Bushing installed in the cam journal an honed.?
 
If you're in my area (mn - IA) z-machine in ocheyedan, ia does good work and are reasonable. Had the head off my 6nz cat surfaced there last summer. Friend of mine had two c15 cat's completely done there, line bored, decked, counter bores cut, cranks done, ext. I won't say on an open forum what the bill was but I was surprised how reasonable it was when he told me.
 
I've dealt with Loren at Z, very nice, informative guy.
Might have to talk to him about refreshing some 6.7 Cummins longs.

Mark.
 
ktllc15 said:
If you're in my area (mn - IA) z-machine in ocheyedan, ia does good work and are reasonable. Had the head off my 6nz cat surfaced there last summer. Friend of mine had two c15 cat's completely done there, line bored, decked, counter bores cut, cranks done, ext. I won't say on an open forum what the bill was but I was surprised how reasonable it was when he told me.
Click to expand...

Ultra secret squirrel chit eh?
 
FYI, I was quoted $700 for cam bushings all around.

The rest of that work is pretty normal stuff. I agree it should be under $1500 for all that you listed.
 
You must log in or register to reply here.
Back
Top