Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   PDW (http://www.competitiondiesel.com/forums/forumdisplay.php?f=66)
-   -   Freeze Plugs/Tappet Covers (http://www.competitiondiesel.com/forums/showthread.php?t=138809)

PDW Power 07-26-2012 01:12 PM

Freeze Plugs/Tappet Covers
 
5 Attachment(s)
Just releasing are new Freeze out plug set. It includes all 6 Freeze plugs for 12v motors. Soon to be released is 24v and CR editions.

The Rear freeze plug and front freeze plug are thinner than the four side plugs. The rear plug has a 1/2 NPT thread in it for any bypass you'd like to make or just a dead plug if no bypass is needed.

Complete Set of Six Plugs shipped to you for 199.00.
Also releasing Clear Tappet Cover shipped for 225.00.

If interested call us at 717-469-4378 or 717-557-7060 or send us a PM or Email.

Thank you, Shane at PDW

PDW Power 07-29-2012 03:02 PM

Also releasing this week of Heavy Duty pushrods for 12v's, 24/CR's and 6.0L Powerstrokes.


12v HD pushrods 269.00 Shipped.
24/CR HD pushrods 289.00 Shipped
6.0L Powerstrokes HD pushrods 239.00 Shipped.

If we get Orders of Ten of any set in next week I can take another 30 bucks off a set! Call shop or PM for more details or interest. Ill hold all orders till friday and place order if there's Ten orders of sets by then you'll get pushrods for 30 bucks cheaper!!!

If you bend or break one send it back and it will be replaced FREE!!

kleann 07-29-2012 03:43 PM

I like the front plug

scott 06 07-29-2012 07:23 PM

nice looking products clear side cover is neat

PDW Power 07-29-2012 07:30 PM

Thanks. Were almost finished with front clear cover that will also clear our adjustable gears also. Then working on 24v and CR front covers after 12v products are done.

fordcummins 07-29-2012 07:40 PM

Very nice looking what is clear side cover made from

rileydsking 07-29-2012 08:01 PM

The clear tappet cover would be perfect for my hoodless hotrod..

2 questions..
will it clear a p-pump?
what kind of seal does it use?

jkidd_39 07-29-2012 08:10 PM

Will you sell.just the 4 side plugs? I.already Have the front And rear plugs

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Red_Rattler 07-29-2012 08:17 PM

More info and pics on the side cover if you have them. How thick is it? Plexiglass or?

PDW Power 07-29-2012 08:32 PM

The clear covers are made from lexan and another material. They have like a blueish/tint look to them. We had them on 2 trucks and ran the hell out of them and no leaks or anything. you cant over tighten them either. We had spacers made for them so when tighten them down it doesnt break or crack it. They have a full o-ring around outside of cover. were working on adding LED's to the corners of couple different colors to light them up. Yes they clear P pumps no problems. around the 3rd bolt they are machined to clear P-pumps.

Were working on finishing up the clear front covers for 12v's also. Making them to clear adjustable timing gears also.

Yes i can sell just the side plugs for 149.00 shipped.

PDW Power 07-29-2012 08:35 PM

The side covers are 3/8 or 1/2 inch thick Ill double check tomorrow once get to shop

newsmoke 07-29-2012 08:35 PM

Looks great!!

PDW Power 07-29-2012 08:46 PM

Thank you.

PDW Power 07-30-2012 02:18 PM

1 Attachment(s)
Heres picture of how we have it notched out to clear p-pumps. Also the cover is 3/8" thick.

HightechRedneck 07-30-2012 05:48 PM

Package deal for both covers, pushrods, and the freeze plugs?

Thanks!

PDW Power 07-30-2012 06:58 PM

Send you a PM in morning. Ill be talking to machine shop about front covers tomorrow.

HightechRedneck 07-30-2012 07:44 PM

Thanks!! Forgot to add the adj gear too. I think they would be awesome lit up and with how this engine is getting set up you should be able to see both.

PDW Power 07-30-2012 09:09 PM

Which adjustable gear? We didnt get any of covers lighted up with LED's yet. Wasn't sure if people would like them lite up. But if people like them ill talk with machine shop to make them and we can install LED's in them of bunch of different colors.

Dockboy 07-30-2012 09:17 PM

Will the front plug fit a CR block? If so, how far does it stick out and what is the cost?

Thanks

PDW Power 07-30-2012 09:27 PM

Were working on them right now at machine shop. If stick out from block its no more than 1/8" on 12v's ill double check tomorrow might only be a 1/16" inch from block. They fit behind the fan coupler on 12v's. Ill post findings in morning.


All times are GMT -5. The time now is 05:35 AM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com