Used Silver 62

Powerstroke Racer

Powerstroke Racer

Comp Diesel Sponsor
Joined
Apr 23, 2006
Messages
1,586
Industrial Injection 3rd Gen. Silver 62 PhatShaft Turbo. Large Flange (43/8") 04.5-06* 350-650 HP****

What is something like this worth used?
Has approximately 15000 miles on it.
 
ClamDigger4 said:
So it's a 62/74/14

from phone
Click to expand...

Strait from their website,

2004.5-07 SILVER BULLET 62/80


The Silver Series PhatShaft is our latest effort to achieve perfection. Much like the Super PhatShaft it was designed to handle multiple fueling upgrades and comes in three sizes 62mm 64mm, and 66mm. What separates the Silver Series PhatShaft from the Super PhatShaft is our new technology 74mm turbine wheel. To improve on the Super PhatShaft turbos we needed improve performance at a lower rpm range and we needed to reduce compressor surge. The solution is the 74mm turbine which is the latest in turbine trim design technology. The new trim design transfers exhaust gas energy more efficiently than any other turbine on the market. It also allows for better exhaust gas expulsion which results in lower EGT’s and quicker rotor acceleration. The most important benefit of the 74 mm turbine wheel is that it gets rid of turbo surge and broadens the power range. All silver series turbo come with a 360 degree thrust bearing and an appealing polished compressor housing. The Silver series utilizes the proven 14cm exhaust housing with a modified exhaust nozzle. We maximize the wastegate ports in the 14cm housing by enlarging the diameter. The turbine housing wastegate cover it custom build to allow full wastegate travel. Like all PhatShaft turbochargers they are equipped with dual grooved high performance bearings and an adjustable boost elbow. Our Sliver series turbochargers have been proven to be the best turbochargers on the market today.
 
You must log in or register to reply here.
Back
Top