My 4bt jeep project

Trans adapter showed up.

50hp injectors, stage 1 camshaft, bearings, gov spring and fuel pin are in the mail
uploadfromtaptalk1429323629460.jpg
 
The little torchmate is gonna be busy cutting motor mounts and accessory brackets
uploadfromtaptalk1429323816856.jpg
 
We have a huge plasma table, probably 10x30+ft at work. What you want cut?
Nothing right now, but we had some supply issues getting things cut when "it'll be done at the end of the week" turned into a 6 month wait.
 
The exhaust builder kit from mandrel solutions will be here today but will sit on the back burner for a little while
 
I think it was a few days before I stopped finding metal shavings in my hair after I did my 12v head. Don't forget to strip the aluminized coating off around your welds.
 
Made some progress today
 

Attachments

  • 20150509_151355.jpg
    20150509_151355.jpg
    77.9 KB · Views: 0
  • 20150509_153350.jpg
    20150509_153350.jpg
    49.6 KB · Views: 0
  • 20150509_154900.jpg
    20150509_154900.jpg
    38.9 KB · Views: 0
  • 20150509_151414.jpg
    20150509_151414.jpg
    65.7 KB · Views: 0
New fuel injectors are installed
 

Attachments

  • 20150510_172207.jpg
    20150510_172207.jpg
    46 KB · Views: 0
Added some color to the valve covers
 

Attachments

  • IMG_20150511_070006.jpg
    IMG_20150511_070006.jpg
    68 KB · Views: 0
Injection pump is installed
 

Attachments

  • IMG_20150511_184503.jpg
    IMG_20150511_184503.jpg
    58.2 KB · Views: 0
Started making a shroud to cover the fuel lines
 

Attachments

  • IMG_20150513_165617.jpg
    IMG_20150513_165617.jpg
    70.6 KB · Views: 0
Fabricated a shroud for the little 4bt
 

Attachments

  • IMG_20150513_210301.jpg
    IMG_20150513_210301.jpg
    51.9 KB · Views: 0
  • IMG_20150513_165617.jpg
    IMG_20150513_165617.jpg
    70.6 KB · Views: 0
  • IMG_20150513_172953.jpg
    IMG_20150513_172953.jpg
    50.9 KB · Views: 0
  • IMG_20150513_182357.jpg
    IMG_20150513_182357.jpg
    44.9 KB · Views: 0
Before i paint aluminum I treat it with this
 

Attachments

  • 20150513_185929.jpg
    20150513_185929.jpg
    42.8 KB · Views: 0
Some how I misplaced the injection pump gear nut, but found a #6 AN lockout fits perfectly
 

Attachments

  • 20150517_084855.jpg
    20150517_084855.jpg
    46.7 KB · Views: 0
  • 20150517_084909.jpg
    20150517_084909.jpg
    42.7 KB · Views: 0
Back
Top