RustyPanda
New member
- Joined
- Apr 9, 2018
- Messages
- 12
Hey guys I am hoping to get some help from the turbo gurus of compd. So currently I have a ve 12 valve with h1c 12cm waste gated turbine housing . Drilled through divider. Injectors undecided . Just recently I picked up a Caterpillar turbo for twins with specs as follows
Compressor: 69mm small side and 94 mm large side 0.87 A/R
Turbine: 82mm large side 76 mm small side 1.28 A/R
Can't seem to find any number associated with the turbine housing side . Here are some pictures
Only real number stamped into the turbine housing is F2A33 . If the housing is 33cm^2 that would be atrociously large from my understanding. Side note the housing is also waste gated which is nice .
So assuming the housing is somewhat of a reasonable size what is everyone's opinion as to using it for compounds .
Thanks in advance guys
Sent from my SM-A530W using Tapatalk
Compressor: 69mm small side and 94 mm large side 0.87 A/R
Turbine: 82mm large side 76 mm small side 1.28 A/R
Can't seem to find any number associated with the turbine housing side . Here are some pictures
Only real number stamped into the turbine housing is F2A33 . If the housing is 33cm^2 that would be atrociously large from my understanding. Side note the housing is also waste gated which is nice .
So assuming the housing is somewhat of a reasonable size what is everyone's opinion as to using it for compounds .
Thanks in advance guys
Sent from my SM-A530W using Tapatalk