ramtough01
New member
- Joined
- Feb 26, 2008
- Messages
- 2,775
Putting can and clutch on the truck this year and trying to find a decent way to mount the pedal in the cab in a second gen dodge. Did a search and didnt see much. Thanks
I mounted mine to the firewall where the clutch pedal would normally be, since it was an auto truck. Just get it close and have someone help hold it to decide what feels like the correct position. Use the 4 bolt holes and go through to the other side. Note: I did break the aluminum pedal bracket that comes with the pedal, the 4 disk clutch was a little too much for it and using it a lot. I made a stainless one and it's been trouble free since
Sent from my SM-G930R4 using Tapatalk
That sounds like a good idea for a setup. The weighted clutches we use are nothing like the stuff wilwood intends their setup to be used with, especially coming off the line. You're holding all the pressure a grown man can with one leg on the pedal, and I'd bet its somewhere in the neighborhood of 300+ lbs easily. Compared to even a stiff clutch in a car, well, theres no comparison I would think.
Sent from my SM-G930R4 using Tapatalk