Fleetguard Fleetguard Fleetguard

I believe it is a 3 micron. 99.9% sure on that one.

FF5588 replaces
DIESEL PERFORMANCE
PRODUCTS FF1010
Overall Height: 8.00 (203)
Largest OD: 3.75 (95)
Thread Size: 1 1/2-16 UN-2B
 
I believe it is a 3 micron. 99.9% sure on that one.

FF5588 replaces
DIESEL PERFORMANCE
PRODUCTS FF1010
Overall Height: 8.00 (203)
Largest OD: 3.75 (95)
Thread Size: 1 1/2-16 UN-2B

Great! I'll add a bunch of those to my Mumau wishlist :Cheer:

Anyone know the difference in LF 16035 and a LF 3894? Besides thr years their for?

The 16035 has flutes on the bottom that make it easily removable with the right tool.
 
Great! I'll add a bunch of those to my Mumau wishlist :Cheer:



The 16035 has flutes on the bottom that make it easily removable with the right tool.



I thought. Maybe it had a different micron rating.

You'd think they would just combine the two if that's all that's different.

It'd benice to have something to grip on when trying to remove the 3894.

Thanks for the reply.
 
Are these prices still current?

These prices ?
LF3972 Standard '03-'10 7.96
LF16035 Stratapore '03-'10 12.46
LF3959 Standard '98.5-'02 7.76
LF3894 Stratapore '98.5-'02 12.23
LF3349 Standard '89-'98 6.11
LF3552 Microglass '89-'98 12.23


Yes.
 
I thought. Maybe it had a different micron rating.

You'd think they would just combine the two if that's all that's different.

It'd benice to have something to grip on when trying to remove the 3894.

Thanks for the reply.

I find that a wrap or two of duct tape around the filter BEFORE you put it on gives you enough grip to take it off by hand... Get good duct tape though as its not all created equal. I like the black 3M, its softer and makes it easier to grip, some of the cheap stuff is slick.
 
I find that a wrap or two of duct tape around the filter BEFORE you put it on gives you enough grip to take it off by hand... Get good duct tape though as its not all created equal. I like the black 3M, its softer and makes it easier to grip, some of the cheap stuff is slick.

Ohhh a ninja secret. :clap:
 
I find that a wrap or two of duct tape around the filter BEFORE you put it on gives you enough grip to take it off by hand... Get good duct tape though as its not all created equal. I like the black 3M, its softer and makes it easier to grip, some of the cheap stuff is slick.


That's a good idea. Its usually my own fault, I over tighten everything. I've broke many bolts and parts by over tightening.

Whoever suggested writing the mileage and date on the filter.
 
That's a good idea. Its usually my own fault, I over tighten everything. I've broke many bolts and parts by over tightening.

Whoever suggested writing the mileage and date on the filter.




I forgot to finish this sentence. It^ was a good idea.:clap:
 
These prices ?
LF3972 Standard '03-'10 7.96
LF16035 Stratapore '03-'10 12.46
LF3959 Standard '98.5-'02 7.76
LF3894 Stratapore '98.5-'02 12.23
LF3349 Standard '89-'98 6.11
LF3552 Microglass '89-'98 12.23


Yes.


Recent prices? Are you expecting a big jump 2011?
 
does fleetguard make fuel filters for the airdog? im in need of one BAD, any chance you have a part number?
 
I have been receiving numerous PM request for Fleetguard filter prices. I am lousy at keeping up with PM's. Especially when they involve work. So I did this.

OIL FILTERS
LF3972 Standard '03-'10 7.96
LF16035 Stratapore '03-'10 12.46
LF3959 Standard '98.5-'02 7.76
LF3894 Stratapore '98.5-'02 12.23
LF3349 Standard '89-'98 6.11
LF3552 Microglass '89-'98 1 2.23

Purchase 6 or more and take 2% of the total.

What's a Stratapore?
StrataPore™ Filtration Media



Fuel Filters & Air filters ???? I figure most guys are running aftermarket systems so I'll see if there is interest in those and post up on here if need be.
I do keep the Fleetguard replacements for the Airdogs and Fass's

is there a stratapore for 89-98? fuel filter price for 96? thanks
 
Back
Top