Truck Rebuild

Finally had time to blast it used black diamond on the frame and walnut shells on the cab

1A92E773-B966-434A-9A7C-35142382EE94.jpg
 
Where'd you take something that large to be blasted? Or did you do it at your place? I'm pretty jealous. Paint is going to stick to that thing like a champ!
 
I just reviewed the thread myself and I owe quite a few thank yous to all you guys
So thank you for all the compliments it means a bunch
 
Was able to prime the frame cab and rear axle yesterday don't have any good pics, but the good news is:
Got some color down inside the cab with raptor liner color tint bed liner. I'm pretty happy with the results
FC4338FD-9CDF-42D4-88B5-9BDD3F6E3DE2.jpg


439F4796-5FAF-4D32-B8DC-EB2CED08D91B.jpg


AF03B30D-082D-442F-A184-BDBD66199A44.jpg
 
I really like Raptor liner. I typically will add a 1:5 ratio of whatever gloss paint and it gives it a smoother feel and it's easier to clean. Not ideal for a bed, but ideal for stuff like this.
 
Got the bottom under coated with a breathable paintable undercoating, I originally wanted to raptor the bottom too but was advised against it as it will rot the steel from the inside as it does not breathe
Working on stupid fennin seam sealer now
A89DE276-4A59-45A5-903A-531050DDCE19.jpg
 
You must log in or register to reply here.
Back
Top