[Redrider2911]

So I know this isn't the norm at all, but I am thinking of replacing the 60mm WH1C I made with an HE351ve over the top of my S475. I know the WH1C is choking the exhaust side, I have the 351 sitting here and from what I read they open up to 20cm; so I thought I might try it. The wheel is a little chewed up so I was already planning to replace it, but I was thinking why not grab a 63.5mmx88mm wheel from a Powerstroke for dirt cheap? I know their shafts are a little bigger, I have access to a good lathe here at work; so I was just going to plan on making a shrink fit aluminum bushing...