DUAL CP3 CONTROL MODULE By TS Performance

wideopen

Slum Lord
Joined
Apr 3, 2006
Messages
20,816
FOR IMMEDIATE RELEASE



TS Performance
851 Lovers Lane
Bowling Green, KY 42103
270-746-9999
http://www.TSPerformance.com
Questions, special requests, tech info: Randy@tsperformance.com

Dual CP3 Control Module Part Number 1200100


Most people think adding a second CP3 pump to their truck is only needed to support huge injectors and big time horsepower, but the truth is a dual CP3 setup on a factory stock truck will net you a bunch of horsepower- anywhere from 50 to 100 depending on the application. But controlling the twin CP3 pumps was sometimes tricky.

Until, that is, TS Performance came out with their new Dual CP3 Control Module. TS Performance knows diesel and they certainly know electronics. This unit controls the signal being sent to the stock pump by a micro-controlled board. TS is able to split the signal between the two pumps at lower rpms when the extra fuel pressure and volume is not needed. When power demands increase the board brings both pumps in to supply the needed fuel. Compared to other kits that simply use a resistor to split the signal equally or send the same signal to each pump (causing higher volume and pressure ALL the time) the TS Performance Dual CP3 Control Module is a programmable micro that can be adjusted and tuned to work with different conditions and/or driving habits.

The TS Performance Dual CP3 controller will work on any dual CP3 setup, so you can add it to a custom setup you’ve put together or replace the faulty electronics supplied by a kit you’ve already installed. Applications for all Cummins and Duramax Dual CP3 kits.

TS Performance offers a lifetime warranty (ask around about that, it’s unprecedented) so if you ever have a problem just send it back and it will be replaced.

The Dual CP3 Controller from TS Performance is available now.
 
Hmmm... I got a new dual cp3 kit but was shorted a controller. I'm deffinetly waiting to hear reviews of this controller. I've heard some brands have rough idles and surging issues.
 
Dear Dennis,

I want a triple CP3 Cummins controller for Christmas. I know currently the Duramax guys have them made by others, but nobody offers a triple off the shelf Cummins CP3 controllers that truly work as well as the standard dual controller. So please get to work on that for us.

Thanks,

Chris
 
Dear Dennis,

I want a triple CP3 Cummins controller for Christmas. I know currently the Duramax guys have them made by others, but nobody offers a triple off the shelf Cummins CP3 controllers that truly work as well as the standard dual controller. So please get to work on that for us.

Thanks,

Chris

I can't wait.
 
hey guys probly not right to ask but I am anyway. Just put a dual cp3 kit on my pulling truck and hook everything up and it wont start but plug the old stock wires to cp3 in the middle and fires right up. how do you test the module?
 
Back
Top