Competition Diesel.Com - Bringing The BEST Together - View Single Post - 2.6 Diesel 4x4

HolnaiderFarms · 11-02-2014, 05:06 PM

Turbocharger: The vehicle is limited to a single turbocharger; the inducer bore on the
compressor housing may be 2.6”. The inlet will be measured using a 2.65-inch plug or internal calipers. Bushing from any larger turbo size down to a 2.6 turbo is PROHIBITED. A stock map width enhancement (MWE) groove is allowed. No MWE groove will be allowed that has a width greater than 1/4 inch. All provisions allowing air to the wheel other than via the bore and the MWE groove are prohibited. 6.4 liter Powerstroke engines may utilize the factory twin-turbo configuration.

Rule states bore be in the compressor housing!! Me confused how they can have bore 3-4 inches from wheel and be legal? Or is it all bunch shhhhhhh--- shhhhhhhnaagains?

11-02-2014, 05:06 PM	#19
HolnaiderFarms Name: HolnaiderFarms Title: First timer Status: Not Here Join Date: May 2012 Member`s Gallery Posts: 616	Turbocharger: The vehicle is limited to a single turbocharger; the inducer bore on the compressor housing may be 2.6”. The inlet will be measured using a 2.65-inch plug or internal calipers. Bushing from any larger turbo size down to a 2.6 turbo is PROHIBITED. A stock map width enhancement (MWE) groove is allowed. No MWE groove will be allowed that has a width greater than 1/4 inch. All provisions allowing air to the wheel other than via the bore and the MWE groove are prohibited. 6.4 liter Powerstroke engines may utilize the factory twin-turbo configuration. Rule states bore be in the compressor housing!! Me confused how they can have bore 3-4 inches from wheel and be legal? Or is it all bunch shhhhhhh--- shhhhhhhnaagains? Last edited by HolnaiderFarms; 11-02-2014 at 05:09 PM.