This is what I've heard so far:
1.Weight is set at 8500 front hanging weights permitted but no weight boxes
2.Map groove set at .150 inches will be a diagram to specify location acceptable for MWE
3.Single tire unless factory OEM dully truck
4. Dual ground contact patch of one side dual tires set at 18"
5.Air to Air
6.Hanging weights allowed 60" front axle no weight boxes
7.8500lbs max weight
8.Intake runners allowed
9.No frame Turbo specification all of these would be ok s-400 Frame, HX50, GT42
10.True 2.5 no clipped wheels or stepped covers, all air must go through the 2.5 inducer bore, plug 2.550
11.Safety: fire extinguisher,no fire suit, trans covers, air shut off
12.Drive shaft loops highly suggested
Still needs confirmed with USA east tech committee
|