Keep in mind, this kit is only for those modules that have been replaced by the dealer with an in tank pump and or the 3rd gen in tank pump guys.
That said, if you are running a DS1, you would most likely not see much or any of a difference DEPENDING on where your tube has been installed. I also run a DS1 and can draw 30+ gallons out of the tank, so it just depends.
If the in tank module is intact, you could use the DSV and it is just a more precise way of locating the suction end of the device.
Give Eric or myself a call at the shop Monday and we can make sure you are getting what you need.
Dave
866-446-1043 or my cell 503-970-6712
|