wideopen
Slum Lord
- Joined
- Apr 3, 2006
- Messages
- 20,816
FOR IMMEDIATE RELEASE
TS Performance
851 Lovers Lane
Bowling Green, KY 42103
270-746-9999
http://www.TSPerformance.com
Questions, special requests, tech info: Randy@tsperformance.com
Dual CP3 Control Module Part Number 1200100
Most people think adding a second CP3 pump to their truck is only needed to support huge injectors and big time horsepower, but the truth is a dual CP3 setup on a factory stock truck will net you a bunch of horsepower- anywhere from 50 to 100 depending on the application. But controlling the twin CP3 pumps was sometimes tricky.
Until, that is, TS Performance came out with their new Dual CP3 Control Module. TS Performance knows diesel and they certainly know electronics. This unit controls the signal being sent to the stock pump by a micro-controlled board. TS is able to split the signal between the two pumps at lower rpms when the extra fuel pressure and volume is not needed. When power demands increase the board brings both pumps in to supply the needed fuel. Compared to other kits that simply use a resistor to split the signal equally or send the same signal to each pump (causing higher volume and pressure ALL the time) the TS Performance Dual CP3 Control Module is a programmable micro that can be adjusted and tuned to work with different conditions and/or driving habits.
The TS Performance Dual CP3 controller will work on any dual CP3 setup, so you can add it to a custom setup you’ve put together or replace the faulty electronics supplied by a kit you’ve already installed. Applications for all Cummins and Duramax Dual CP3 kits.
TS Performance offers a lifetime warranty (ask around about that, it’s unprecedented) so if you ever have a problem just send it back and it will be replaced.
The Dual CP3 Controller from TS Performance is available now.
TS Performance
851 Lovers Lane
Bowling Green, KY 42103
270-746-9999
http://www.TSPerformance.com
Questions, special requests, tech info: Randy@tsperformance.com
Dual CP3 Control Module Part Number 1200100
Most people think adding a second CP3 pump to their truck is only needed to support huge injectors and big time horsepower, but the truth is a dual CP3 setup on a factory stock truck will net you a bunch of horsepower- anywhere from 50 to 100 depending on the application. But controlling the twin CP3 pumps was sometimes tricky.
Until, that is, TS Performance came out with their new Dual CP3 Control Module. TS Performance knows diesel and they certainly know electronics. This unit controls the signal being sent to the stock pump by a micro-controlled board. TS is able to split the signal between the two pumps at lower rpms when the extra fuel pressure and volume is not needed. When power demands increase the board brings both pumps in to supply the needed fuel. Compared to other kits that simply use a resistor to split the signal equally or send the same signal to each pump (causing higher volume and pressure ALL the time) the TS Performance Dual CP3 Control Module is a programmable micro that can be adjusted and tuned to work with different conditions and/or driving habits.
The TS Performance Dual CP3 controller will work on any dual CP3 setup, so you can add it to a custom setup you’ve put together or replace the faulty electronics supplied by a kit you’ve already installed. Applications for all Cummins and Duramax Dual CP3 kits.
TS Performance offers a lifetime warranty (ask around about that, it’s unprecedented) so if you ever have a problem just send it back and it will be replaced.
The Dual CP3 Controller from TS Performance is available now.
