hopefully the pics come through.
right now it does up to 10 channels, but feedback from users is they want more. its software upgradeable so all units out there will be reprogrammed to do more probably 12 or 15.
so you choose up to 10 (or 15) channels out of:
8 egts
4 analog (ex. pressure)
2 variable reluctance/ hall effect (2 wire speed/tach sensors)
1 built in 12valve tach pickup
4 0-5v square wave frequency (3 wire tach/speed sensors)
4 switch inputs (on-off switches)
you can use any sensor you want, or buy the sensors from TS.
wire harness is complete and loomed for easy install.
you can connect to all these channels and just download a different config file that choose 10 (or 15) of these per run.
holds from 80 seconds to 2 days per run depending on the channel count and sample rate, and has 16 runs before you need to download to a laptop.
it has an LCD screen so you can do graphing from the unit. stores max and min to view after each run on the LCD screen.
software allows you to do realtime graphing for tuning purposes.
hopefully i covered everything. i can get a picture of the unit and the harness tomorrow.