Dual CP3 kit pre-order

I need a cam..... maybe we can work something out. LOL.
 
PICTURES!!!. Cody is working on the instructions tonight and finally had all the parts in one place to take a good pic. The line kit is not pictured, but the base kit includes all necessary line and fittings to connect to the stock fuel system.
 

Attachments

  • cp3kit.jpg
    cp3kit.jpg
    50.9 KB · Views: 0
Last edited:
You guys have a 4th gen dodge dual CP kit? I want one if you have a kit
 
Last edited:
we intend to have a dual pump kit on our 2012 by TS the end of this month. That and some other cool stuff for the 6.7 crowd.
 
looking real good, any trouble with throttle position sensors mounted on the "head" seems that black bracket bottom center of pic of kit uses two of the bolt holes, some trucks are "lucky" to have stuff mounted there.
 
The 03-04 throttle box will have to be spaced up a little, but should not be an issue.
 
a single spacer for the bolt closest to the head for the throttle box would do it, provided you have three longer bolts, and sandwich the throttle box base and the bracket.
 
I called a few days ago and they're still working on getting the 5.9 production kits out in three weeks. This would probably hinder any large leaps in progress on the 6.7 kits I'd say.
 
In the first picture it doesn't look like anything mounts to the head, but then other pics look like it does. Does anything mount to the head?
 
There is a bracket that holds our fuel distribution block that mounts to the 3 bolt holes in front of the intake horn on the 5.9 kits. 6.7s will be different.
 
We have ONE of these kits at this time that we can sell. Needs to be a 05-07 5.9. No engine mounted apps. Comes with everything needed to hook into stock fuel system. If you have an airdog or fass you will need to source some adapters. Needs to use a 6.7 cummins top pump and have a black power steering reservoir. $1250.00
 
You must log in or register to reply here.
Back
Top