Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Vendor Row > Sponsor Forums > Diesel Pros
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 09-13-2014, 04:43 PM   #1
Knuckle-head
 
Knuckle-head's Avatar

Name: Knuckle-head
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Location: Florida
Member`s Gallery
Posts: 7
Unhappy powerstroke help

I have a 03 F-350 w/ a 7.3 powerstoke turbo diesel. question is im getting coolant in the oil enough to make it milky and the rest is going out the breather then out the exhaust. it seems to only do it when the motor is at normal temp. also the trucks runs great no hiccups no hydro lock nothing. has a new oil cooler on it now but I did that cause of bad information. can you help?

Last edited by Knuckle-head; 09-13-2014 at 04:45 PM.
 
Old 09-13-2014, 06:47 PM   #2
oldestof11
 
oldestof11's Avatar

Name: oldestof11
Title: Drag racer
Status: Not Here
Join Date: Jul 2007
Location: Dixon, IL
Member`s Gallery
Posts: 9,084
Calm down. It's the weekend. You will get your answers. A sponsor forum is not tech.

That said, head gaskets.
__________________
Jon
Click the image to open in full size.
 
Old 09-13-2014, 06:54 PM   #3
Knuckle-head
 
Knuckle-head's Avatar

Name: Knuckle-head
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Location: Florida
Member`s Gallery
Posts: 7
Sorry been trying to fix this all week and had me a little upset. Thank you for the response
 
Old 09-13-2014, 09:50 PM   #4
94stroker

Name: 94stroker
Title: Rookie
Status: Not Here
Join Date: Apr 2011
Member`s Gallery
Posts: 4
Possibly injector cups?
 
Old 09-13-2014, 10:04 PM   #5
Knuckle-head
 
Knuckle-head's Avatar

Name: Knuckle-head
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Location: Florida
Member`s Gallery
Posts: 7
Thanks for the response. My game plain for tomorrow is to pull injectors and run a borescope down the tubes if nothing there then heads are coming out
 
Old 09-14-2014, 02:55 AM   #6
444 ci
 
444 ci's Avatar

Name: 444 ci
Title: Diesel Enthusiast
Status: Not Here
Join Date: Nov 2009
Location: ohio
Member`s Gallery
Posts: 183
if its injector cups he should diesel fuel in his coolent correct?
 
Old 09-14-2014, 10:53 PM   #7
greenbeast
 
greenbeast's Avatar

Name: greenbeast
Title: HEUI Dinosaur
Status: Not Here
Join Date: May 2007
Location: Readyville TN
Member`s Gallery
Posts: 201
If it's cups diesel will be in the coolant. Check your o rings on the oil cooler first, you can drain the oil and pressurize the coolant system and see if water comes out of the oil filter mount or the drain plug.
__________________
97 CC F-250 4x4 New best 7.03@97 1/8th 11.08@120 1/4
 
Old 09-14-2014, 11:55 PM   #8
Knuckle-head
 
Knuckle-head's Avatar

Name: Knuckle-head
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Location: Florida
Member`s Gallery
Posts: 7
Has a new oil cooler and o-rings and still same problem. I took the injectors out today and the cups look fine ( used a borescope to check) so I decided to check headgaskets I got the driver side one off and it appears to be ok now tomorrow I'll pull the other head and see what I find
 
Old 09-16-2014, 02:24 PM   #9
tmbuehrer

Name: tmbuehrer
Title: Rookie
Status: Not Here
Join Date: Jun 2014
Member`s Gallery
Posts: 1
My guess is the block or heads have a crack in them somewhere. So when you build heat and pressure in the cooling system it pushes it into the crankcase. Head gasket is possible but not likely as it would probably putting pressure in the cooling system too and would likely only do it when cold. Oil cooler would put oil in coolant. Cups would put diesel in coolant.


Sent from my iPhone using Tapatalk
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:13 AM.

 


Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2019, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com