Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Competition and Performance > P-Pump 24Valve
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 07-14-2017, 08:24 PM   #1
sltlytwkd
 
sltlytwkd's Avatar

Name: sltlytwkd
Title: addicted
Status: Not Here
Join Date: Apr 2016
Location: Luxemburg WI
Member`s Gallery
Posts: 138
Original tach w/ATI damper in a 94??

My current project is putting a p-pump 24v in my '94 dodge. I want the entire dash to work like normal; coolant temp, oil press, tach. I know the temp and pressure gauges will be easy just by changing the sensors, but I need help with the tach! I'm using an ATI Super Damper. The original 12v damper only has two notches, so I guess going off the damper bolts is out of question? Ive heard of Dakota Digital but never used their products. Is that the only way to go? Any input would much appreciated!!

Thanks in advance!
Willie
__________________
99' dodge 12v swap, 188/220, 5x16s, scheid 12mm pump, 165lb beehives, silver62/475, fuel lab, 47rh swap
03' jetta tdi, gtb2260vk, race 520s, 3" exhaust, 6" tip, Malone tune, 5 speed
94' dodge ppump 24v, 13mm, 6x18s, 200/220, 475/595, aero 1000, PCS, 4r100 swap, 2wd
 
Old 07-14-2017, 09:32 PM   #2
YoungDiesel27
 
YoungDiesel27's Avatar

Name: YoungDiesel27
Title: Never Enough Time
Status: Not Here
Join Date: Jul 2010
Location: West Virginia
Member`s Gallery
Posts: 825
Sell it and get a fluid damper would be the bolt on solution.
__________________
EFI Live, HP Tuners, Smarty custom tuning
 
Old 07-15-2017, 04:49 AM   #3
sltlytwkd
 
sltlytwkd's Avatar

Name: sltlytwkd
Title: addicted
Status: Not Here
Join Date: Apr 2016
Location: Luxemburg WI
Member`s Gallery
Posts: 138
There's no way I can do it cheaper than $400??
__________________
99' dodge 12v swap, 188/220, 5x16s, scheid 12mm pump, 165lb beehives, silver62/475, fuel lab, 47rh swap
03' jetta tdi, gtb2260vk, race 520s, 3" exhaust, 6" tip, Malone tune, 5 speed
94' dodge ppump 24v, 13mm, 6x18s, 200/220, 475/595, aero 1000, PCS, 4r100 swap, 2wd
 
Old 07-17-2017, 06:40 PM   #4
CowboyEdition
 
CowboyEdition's Avatar

Name: CowboyEdition
Title: Because Diesel
Status: Not Here
Join Date: Feb 2013
Member`s Gallery
Posts: 192
I put a ATI Super Damper on my '98 12V. Had to clearance the lower gussets on the timing cover and added a washer behind the tach pickup to push it out a wee bit and help it line up with the notches in the ATI. Worst case, fabricate a bracket to hold your sensor in place.

Sent from my SM-G935W8 using Tapatalk
__________________
98 12v QCSB Sport Package
0 Plate, 4k gsk, 60# Springs
Ported/Polished/Oringed/Studed Head
DFI 5X0.014's, Standard Pump Mods
S300 VNT Turbo, Mechanically Actuated
Home-built trans with goodies
Borgeson, DOR, Bilstein and Carli Upgrades
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:29 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com