Burnt or bad valve? #6 exhaust lash super tight
I was checking the valve lash and all were good except for #6 so I reset all of the valves and worked my way back to #6 intake and exhaust. Intake was fine, but the exhaust is not...
When I loosened the adjuster the rocker slipped off of the push rod. I tried taking the bolt out of the rocker and pulling the pushrod out of its seat, but when the pushrod reseats the same thing happens. Can't get a 0.010 gauge in there so I'm not sure how tight it actually is. I definitely don't want to run it this way. What's next- pull the head?
__________________
2003 2500 QCSB 4x4 3.73 - Firepunk HPT Tuned, BBI Stage 2's, DAP 63/68/12, Hamilton [624/1050 and 680/1206 with Water/Meth]
2012 2500 CCSB 4x4 3.73 Firepunk EFI and Comp3, D&J Built 6.7L, S&S 200%, ATS Dual CP3 w/ Exergy 12mm, S366/S483 Compounds [1086/2289]
|