The 40 is a 16cm the 3B was a 26cm now its a 23cm (wasnt worth the trade).
I did get it figured out. I am not sure what fixed it since I changed alot.
I ground down the fuel plate, different afc springs, drilled the volute on the 40 to wastegate both sides, added 100hp injectors, gasket matched the exhaust manifold and hx40 housing, rebil the hx40, rebuilt the exhaust system and set the wastegate to crack at 24psi.
Now it does good things. About 65 psi total, 32 psi from the bottom. The egts never get over 1400* and I have to work to get them that high.
__________________
1997 Ram 3500 Studs, Fire rings, Twin Ram Intake, Snow Performance Stage 2 water/Meth, NX 2 stage, 4k kit, 40/3B, +45hp injectors, Custom fuel plate, 4" Stacks, 13" FE clutch, 191 Delivery valves, BD Boots.
Nitrous, its the little blue pill for diesels.
|