06 1000hp Build
I'm wanting to clear the 1000hp mark. I have some things to change up and even get built to hold the power.
Also looking at S&S 150% New Injectors.
I'm wanting to upgrade my current compound turbos from a 62/ s475 to a 64.5/480.
Would I be better off with a 64.5/68 or the 64.5/73? Also would the .83 turbine or .91 turbine be better. Will be running a T4 steed speed.
I haven't figured out if I want a gated housing on the secondary or a non gated housing with an external gate on the manifold. If I was to go the external gate path. Is it best to have it vent to the atmosphere, hot pipe, or downpipe? Was looking at the Tial 38mm gates.
I wish my 62/475 would clear 1000hp so I wouldn't have to change them out. I haven't been on the dyno with them.
Thanks
__________________
06 AirdogII165 SB SSDD3600. SXE S362/S475. Silver Bullet EFI. BBI Stage1.5 Injectors Fluidampr, DAP #104 Springs, DAP .093 Pushrods, L19 Studs, SteedSpeed Coolant Bypass, 5"TBE, Fleece Dual Fuelers, T&C 10mm stroker 6.7/mild 6.7, Vibrant Boots, On3 Intercooler
|