Need some exhaust parts, and cylider for a BD exhaust brake-

Howdy guys!

I'm looking for a 2nd gen 4" down pipe that will fit a stock turbo.

Also need the goofy shaped 4" pipe for a W350 that is attached to the downpipe and passes around the transfer case.

The BD brake I have, has the large diameter cylinder. Not the small one.

Like this one-



Would it be OK to use regulated air, vs vac to run it? Brake was bought used and no controller or wiring for it. If someone has that for a decent price, I'll buy that too.

Thanks!

The W350 down pipe (89-93) for use with an exhaust brake, is our part number 1040050 feel free to Pm me for pricing or any of the BD dealers/supporting vendors here for pricing as well.

As for using air on the Vac style brake, no you can't due to the desing of the piston and seals.

Regards,
Hector