Black friday.

One last thing to add for Black Friday sales.

6.7l blocks with 14mm main and head bolts, all seven cam bearings new no core $2,000

5.9l prototypes Siamese bores (think 5.9l bore in 6.7l block. Wall thickness is .300-.340 instead of .260-.290" and it is supported by siamese cylinders. 14mm main and head bolts and all seven cam bushings $2,000. Very limited supply.
 
From midnight tonight to noon tomorrow 24v springs and Chromoly retainers $399 normally $599
12v or 24v pushrods $175 normally $249
12v or 24v extreme pushrods $225 normally $349
Pre-order solid 6.7l competition blocks $2750normally $3900. Delivery expected in late December.
 
Last edited:
Texashighways said:
One last thing to add for Black Friday sales.

5.9l prototypes Siamese bores (think 5.9l bore in 6.7l block. Wall thickness is .300-.340 instead of .260-.290" and it is supported by siamese cylinders. 14mm main and head bolts and all seven cam bushings $2,000. Very limited supply.
Click to expand...


Damn interested!! More info please?
 
For Monday we are offering our 62mm cams at 50% off.

These are our competition flat tappet cams. Made in Michigan, USA. They start at a 210-230 .415"/.415" and end at a 230-240 .500"/.500" and 240/260 .500".500"
Factor in your rocker ratio and you get a bit of lift. The lift will do you no good if your head sucks. On the other end of the specturum if your head flows well, you get less coal at higher rpm and more horsepowers.

$499 from now until noon on Monday. I hope you guys had a Great thanksgiving.
 
You must log in or register to reply here.
Back
Top