04dirtymax
New member
Which is the better route.... buying a built tranny or getting a kit to build the stock tranny??? either or, what brand is the best to go with?
Slipping Clutches
- Thread starter 04dirtymax
- Start date
Turbo Performance
Comp Diesel Sponsor
Either way is probably okay, depends on whether or not you have someone to do the rebuild for you or if you know what you're doing rebuilding an Allison. I put alto red eagle clutches and a triple disc converter in mine, seems to hold power fine but you could buy a built suncoast, ATS, or someone else's trans off the shelf if you don't want to mess with the rebuild time. $.02
04dirtymax
New member
the best deal i've found is the stage 5 built tranny from suncoast, what kind of power will these withstand??
Turbo Performance
Comp Diesel Sponsor
Not speaking from experience, but from what I've heard they'll hold just about anything you can throw at them.
04dirtymax
New member
alright man i apreciate it
xtreme8504
Paid for by ME
Suncoast converter kicks in my truck...level ten trans shop in easton PA- not so good. Red alto clutches and transgo kit are holding 530/1050 ish street driving with no problem. Check out PATC, they also build ally's for reasonable price