6.4L Cummins Build Complete and awesome.

Either way trans has to come back out for an annual inspection, more upgrades, and converter restall in the spring or while it's put away this winter to accommodate for the abuse it's going to be seeing.


Sent from my iPhone using Tapatalk
 
Sorry for the reposting of some of the images. They weren't showing up using Tapatalk so I posted them a second time.
 
Few pics, don't want to derail from your thread though. Dirty azz thing needs some TLC lol
 

Attachments

  • IMG_20170902_151252761.jpg
    IMG_20170902_151252761.jpg
    130.5 KB · Views: 0
  • IMG_20170902_153605289.jpg
    IMG_20170902_153605289.jpg
    180.2 KB · Views: 0
  • IMG_20170902_155957273.jpg
    IMG_20170902_155957273.jpg
    180.7 KB · Views: 0
  • IMG_20170902_160915706.jpg
    IMG_20170902_160915706.jpg
    213.5 KB · Views: 0
  • IMG_20170902_161544227_TOP.jpg
    IMG_20170902_161544227_TOP.jpg
    224.7 KB · Views: 0
  • IMG_20170902_170646359.jpg
    IMG_20170902_170646359.jpg
    248.9 KB · Views: 0
Oh don't worry she will clean right up I'm sure. I have a couple buddies running ppumped 24v engines. Definitely some power with bigger pumps and injectors.


Sent from my iPhone using Tapatalk
 
Just running a 215hp pump with some added parts with maybe 6x.012 injectors. Don't want to put the 6x.020's in that I have. Keeping it conservative around 600ish HP. Head is all done already. Ported, valve job, oring etc... Side draft with port matched manifold. Nothing to crazy lol
 
When you said you killed a set of rings, what exactly went wrong? I know the end cuts on some of mine weren't perfectly parallel.

Sent from my XT1575 using Tapatalk
 
biggy238 said:
When you said you killed a set of rings, what exactly went wrong? I know the end cuts on some of mine weren't perfectly parallel.

Sent from my XT1575 using Tapatalk
Click to expand...



Filing them by hand it was hard to keep the ends square and the moly facing kept wanting to chip even with a very fine toothed machinist file. I wanted them as close to perfect as possible.


Sent from my iPhone using Tapatalk
 
Where did you get that fan pulley and where can I get one ? Changing the belt wit the FD is a pain in the ass !
 
Found it on the Pure diesel power website.
03-17 5.9L/6.7L Cummins Billet Aluminum Fan Pulley
Part number: PE-FAN-PULL
$79.95
 
Completely awesome build. You are definitely someone who pays attention to detail, it shows by the even distribution and angle of the stickers under the hood.

I'm sure Fastenal loved seeing you walk in the door.

You think the transmission will hold up to this new engine?
 
Last edited:
Red Sleeper said:
Completely awesome build. You are definitely someone who pays attention to detail, it shows by the even distribution and angle of the stickers under the hood.

I'm sure Fastenal loved seeing you walk in the door.

You think the transmission will hold up to this new engine?
Click to expand...

Thanks man, and I used the company Account I work for so literally got the bolts for pennies on the dollar lmao.

The converter and trans have about 3k miles on them, but In the current state the trans will not hold up to boost launches very long being I still have a stock intermediate shaft. And Ive heard a DPC triple disc is good for around 100 full power passes at 800-1000hp before needing freshened up. Hopefully going to get it to the track and make some passes to see what she does and if I break the intermediate I will trailer it home. Trans is coming out anyway this coming winter/spring to have the converter restalled, TCS maraging intermediate shaft, some billet drums and clutch retainer to resolve aermet shaft wear issue, and to bolt the rear sprague in. Then run it a season and upgrade to a dpc quad disc with oversized input. Unless I decide to sell it.
 
Last edited:
Well I have about 1500 miles on it and have to drop the trans pan and valve body already to change the harness due to it leaking fluid into the connector causing it to go into Limp mode. Going to upgrade the transducer to the 94-99 style and upgrade to a DNJ GM Gov pressure solenoid since the pans coming off.
 
Suppose to be more durable I guess. Have to have a conversion harness for it so I will probably buy the kit BD sells.
 
You must log in or register to reply here.
Back
Top