Having problems getting good information on piston to valve clearance. Cam manufacturer just wants to sell me an offset cam key.
Protrusion is .027. Valves on the intake side are recessed. 028 to .032
Exhaust is .044 to .046. Trying to figure out what thickness head gasket to run or how much to get the Pistons machined. It's just an rv cam but could tell intake valves we're kissing the pistons.
Protrusion is .027. Valves on the intake side are recessed. 028 to .032
Exhaust is .044 to .046. Trying to figure out what thickness head gasket to run or how much to get the Pistons machined. It's just an rv cam but could tell intake valves we're kissing the pistons.