Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Vendor Row > Sponsor Forums > Mumau Diesel
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 04-19-2014, 10:37 PM   #1
RacinDuallie
 
RacinDuallie's Avatar

Name: RacinDuallie
Title: Black Sheep Racing
Status: Not Here
Join Date: Apr 2006
Location: Supporting Northeast Diesel Racing
Member`s Gallery
Posts: 17,369
Talking No Post Whoring on Cakes This Time........This is Serious.....

The latest round of fueling tweaks to the ol First Gen, has me driving with a small cut of 2x8 board- as a co-pilot- to snuff out those pesky run aways

I had the throttle/trans kick down cable bracket on and off many times while tweaking the pump. Road tested- came back happy,

-then I lifted the hood again and popped the injectors out for your Mumau First Gen- For-tee's

I finally realized a starter "bump button" in the engine compartment needs to be planned to aid in self priming. Future to do list addition.....





These Fortee's are the BOMB-NIZZIE



Reviews as follows:

"After installing these Mumau For-tee's, my turbo is hating life", signed RD



__________________

Last edited by RacinDuallie; 04-19-2014 at 10:40 PM.
 
Old 04-21-2014, 07:00 AM   #2
Snedge
 
Snedge's Avatar

Name: Snedge
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Sep 2006
Location: Western Pa.
Member`s Gallery
Posts: 18,831
Glad you like them. Sorry I forgot about the head being the 9mm injector bore.
Hope the turbo lives a little while for you before the shaft breaks..
 
Old 04-21-2014, 02:07 PM   #3
RacinDuallie
 
RacinDuallie's Avatar

Name: RacinDuallie
Title: Black Sheep Racing
Status: Not Here
Join Date: Apr 2006
Location: Supporting Northeast Diesel Racing
Member`s Gallery
Posts: 17,369
I like the fact I can still drive her clean, that is until I get aggressive with the pedal....

Total disregard of the pedal leads to blackout conditions.

I needs to be careful now and start looking at air improvements.




I am very satisfied with your Mumau First Gen For-tee's.
__________________
 
Old 04-21-2014, 02:19 PM   #4
diesel_importer
 
diesel_importer's Avatar

Name: diesel_importer
Title: Too Much Time
Status: Not Here
Join Date: Oct 2007
Location: Fairfield,TX
Member`s Gallery
Posts: 4,500
Why make a thread about one of their products all in slang/code? What size are injectors are they? Are they on their online store for sale, or do we have to contact Jeff?
__________________
01 QCSB 2WD AUTO: Redline/Smarty, Monster VP, 6x.013, S467 FMW, Goerend Trans, Caltracs.
Fuel only - 11.85 @ 114, 50 Shot - 11.58 @ 116 w/ 1.69 60'
 
Old 04-21-2014, 03:46 PM   #5
Snedge
 
Snedge's Avatar

Name: Snedge
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Sep 2006
Location: Western Pa.
Member`s Gallery
Posts: 18,831
Slang translation.
4 Hole 7mm nozzle with 12mm body for VE pump
nozzle DSLA 155 P276 are 4x0.013" VCO nozzle 155* cone angle. Extrude honed 40% over.

I'm trying to keep the site strictly Cummins engine parts. No injectors there. I usually don't get into the aftermarket injectors unless we have something going on in the shop. Jeff twisted my arm.
 
Old 04-21-2014, 03:54 PM   #6
biggy238
 
biggy238's Avatar

Name: biggy238
Title: Too Much Time
Status: Not Here
Join Date: Aug 2008
Location: Just North of Wrong
Member`s Gallery
Posts: 10,820
99 cent fotees fo the win

Monkey Fist Rage
__________________
Check out @bdmaximusworx

05.5 Campanella White TDi Jetta 5spd 45.5MPG
-Little Sexy
'10 Silver F250 CCLB 4X4 6.4L cummins Swapped
Insta @trash.panda250
 
Old 04-21-2014, 04:51 PM   #7
RacinDuallie
 
RacinDuallie's Avatar

Name: RacinDuallie
Title: Black Sheep Racing
Status: Not Here
Join Date: Apr 2006
Location: Supporting Northeast Diesel Racing
Member`s Gallery
Posts: 17,369
Snedge- it was the correct nozzie for my intercooled first gen hooptie.

I took a buddy who happens to have a DD first gen also- he was impressed. When he is ready I'll set y-all up.

And I gave you a man love purple nurple- stop lying!!!!



This is a world record on me not modifying anything with wheels though........
__________________

Last edited by RacinDuallie; 04-21-2014 at 04:53 PM.
 
Old 04-21-2014, 07:11 PM   #8
RacinDuallie
 
RacinDuallie's Avatar

Name: RacinDuallie
Title: Black Sheep Racing
Status: Not Here
Join Date: Apr 2006
Location: Supporting Northeast Diesel Racing
Member`s Gallery
Posts: 17,369
Quote:
Originally Posted by Snedge View Post
Slang translation.
4 Hole 7mm nozzle with 12mm body for VE pump
nozzle DSLA 155 P276 are 4x0.013" VCO nozzle 155* cone angle. Extrude honed 40% over.
It's a cute lil 4 holer injector, but I'll tell ya what- the VE just loves it.
__________________
 
Old 04-27-2014, 10:22 AM   #9
RacinDuallie
 
RacinDuallie's Avatar

Name: RacinDuallie
Title: Black Sheep Racing
Status: Not Here
Join Date: Apr 2006
Location: Supporting Northeast Diesel Racing
Member`s Gallery
Posts: 17,369
Snedge- how large can we hone a set of these 4 hole nozzles? You know I have a spare set now..........





just thinking.......BIG.
__________________

Last edited by RacinDuallie; 04-27-2014 at 10:26 AM.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:55 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com