I have my 07 for sale. It's not a puller but is a good start for one.
07 5.9 224,9xx miles
Built auto from Rich Rhoades with about 2k on it - billet input, output, custom high pressure goerend valvebody, clutches, steels, ect.
S369sxe from Travis Hammond with about 30k on it
S&S 85% over full injectors with roughly 35k on em
AFE stainless exhaust manifold
AFE intake
ATS intake arc
EFI live from Wade Boyd
Fass 150
Sinister diesel sump and 1/2" lines
One piece aluminum driveshaft
Rearend completely gone through with new bearings and seals when brakes were done 10k ago
Ball joints done in June
Will have a brand new trac bar and alignment before sale
Rebuilt front driveshaft
20" monstir mayhem wheels on 35x12.50 Atturo's with about 10/32 left
Balancing beads in the tires
Double din stereo
No tears in the seats (minor cracking on the console)
Isspro gauges
Ac compressor, condenser, and refrigerant replaced in July
Brand new trans cooler and lines in March
The oil has been changed very regularly at 3000 miles and fuel filters at 6000 and air filter cleaned every oil change. No corners have been cut on this pickup. I take great pride in what I own and it shows as such.
Have receipts for most and what I don't have I can get very easily. Rich can vouch for anything on this pickup (other than the EFI since he didn't turn it on during test drives of the trans )
Shoot me a text if you're interested. 9705712423
__________________
2000 24v 257k, built nv5600, ranchhands, halos and HIDs, 18" eagles, 35" feirce att, 5" exhaust to dual 6" stacks, gettin a good ole 1200+hp build
2007 QCLB DRW 150k, efi, fass 150, sump, afe stage2 intake, more to come...
|