1972RedNeck
New member
- Joined
- Sep 21, 2014
- Messages
- 93
I'm working on a mid '90's 2388 combine with the 8.3 Cummins. It had a mechanical inline injection pump.
It starts and runs perfect. When you move the throttle lever to the stop position, most of the time it will shut off like it is supposed to.
Occasionally though, instead of shutting down, it will just idle down to about 600 RPM. If you get in the engine compartment to play with the linkage and shut off lever nothing happens. An hour later it might shut off just like normal though.
Thoughts?
It starts and runs perfect. When you move the throttle lever to the stop position, most of the time it will shut off like it is supposed to.
Occasionally though, instead of shutting down, it will just idle down to about 600 RPM. If you get in the engine compartment to play with the linkage and shut off lever nothing happens. An hour later it might shut off just like normal though.
Thoughts?