Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
07-24-2012, 07:03 AM
|
#1
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
Turbo spec compilation thread
I think it'd be a good idea/sticky to put together chart of various turbo specs we commonly use. I know we have the old thread with power and cfm ratings, but i'd like to see a new updated version. I realize this may take a while.
Borg Warner
S200
Turbine Wheel
61.5/69.5
64/74
Comp Wheel
56/80-----58lbs/min
59/80-----61lbs/min
Housings
T3 .55, .70, .76, .85
S300
Turbine Wheel
65/xx, 68/76, 71/80, 73/80
Comp Wheel
57/83--------61lbs/min
60/84.5
62/88--------72lbs/min
63/87
64/92.5
66/91.5------76lbs/min
71/105.5-----86lbs/min
Housings
T3 .55, .70, .85
T4 .83, .88, .91, 1.00, 1.10, 1.25
K31
Turbine Wheel
74/83
Comp Wheel
71/100-------95lbs/min
Housings
T3 .76
T4 .85, 1.0, 1.10
S400
Turbine Wheel
74/83, 77/87, 80/87, 82/87, 82/92, 88/96
Comp Wheel
66/100
71/100-----89lbs/min
75/100-----100lbs/min
76/107-----104lbs/min
78/110
80/116-----120lbs/min
83/119
88/xx
91/xx
Housings
T4 1.0
T6 .90, 1.10, 1.32, 1.51
S500
Turbine Wheel
99/110
Comp Wheel
80/xxx
86/xxx
88/121.5-------145lbs/min
91/121.5-------155lbs/min
95/131.5-----160lbs/min
98/xxx
Housings
T6 .85, 1.00, 1.15, 1.45, 1.60
Holset
HX30
Turbine Wheel
52/65.5
Comp Wheel
44/73--------45lbs/min
Housings
T3 6cm
HY35
Turbine Wheel
58/65
Comp Wheel
54/78
Housings
T3 9cm
HX35
Turbine Wheel
58/70
Comp Wheel
54/78
54/83
56/83-----52lbs/min
60/86-----62lbs/min
62/86
Housings
T3 12cm, 14cm, 16cm
HX40
Turbine Wheel
64/76
Comp Wheel
58/83
60/83
60/86-----62lbs/min
62/86
Housings
T3 16cm, 18cm
T4 16cm, 17cm, 18cm, 19cm, 21cm
HE341
Turbine Wheel
58/65
Comp Wheel
54/xx
Housings
T3 9cm
HE351
Turbine Wheel
58/65
Comp Wheel
60/86-----65lbs/min
Housings
T3 9cm
HX50
Turbine Wheel
Comp Wheel
62/99
66/99
67.5/99
71/99
Housings
HX52
Turbine Wheel
70/84
Comp Wheel
64/99
66/99
67.5/99
71/99
Housings
T4I 16cm, 25cm
HX55
Turbine Wheel
73/xx
77/86
80/86
Comp Wheel
66/98
67/99
65/100
72/xxx
Housings
T6 19cm, 22cm, 25cm
HT3B
Turbine Wheel
86/97
Comp Wheel
73.5/109
Housings
T6 23cm, 26cm, 32cm
HT60
Turbine Wheel
81/94
Comp Wheel
74/105.5
80/112
Housings
T6 26cm
HX60
Turbine Wheel
86/97
90/97
Comp Wheel
76/102
80/113
Housings
T6 23cm, 27cm
HT4B
Turbine Wheel
88/118
Comp Wheel
83/127
88/139
Housings
T6 26cm
HC5A
Turbine Wheel
Comp Wheel
87.5/127
88/139
Housings
T6 41cm
HX82
Turbine Wheel
94/126
Comp Wheel
82/141
90/141
95/152
99/141
103/152
105.5/141
110/151
116/151
Housings
T6 22cm, 25cm, 32cm, 36cm, 41cm, 48cm
Garrett
GT35
Turbine Wheel
62/68
Comp Wheel
61.5/82-----67lbs/min
62.5/82.5---75lbs/min(GTX)
Housings
T3 .63, .82, 1.06
T4 .63, .82, 1.06
GT37
Turbine Wheel
64/72.5
Comp Wheel
55/76-------50lbs/min
59/82-------56lbs/min
61.5/82-----67lbs/min
63.5/88-----68lbs/min
65/88------ 71lbs/min
68/94-------80lbs/min
Housings
T3 .89, .99, 1.11
T4 1.12
GT40
Turbine Wheel
68/77
Comp Wheel
63.5/88-----68lbs/min
65/88-------71lbs/min
68/94-------80lbs/min
Housings
T4 .85, .95, 1.06, 1.19, 1.34
GT42
Turbine Wheel
75/82
Comp Wheel
70/94------84lbs/min
70.5/94----98lbs/min(GTX)
75/102-----96lbs/min
76/102-----114lbs/min(GTX)
Housings
T4 1.01, 1.15, 1.28, 1.44
T6 1.01, 1.15, 1.28
TV4502
Turbine Wheel
78.5/85.5
Comp Wheel
65.5/91
Housings
T6 1.22
GT45
Turbine Wheel
80/87
Comp Wheel
80/108------112lbs/min
80/108------127lbs/min(GTX)
Housings
T4 1.01, 1.15, 1.28, 1.44
GT47
Turbine Wheel
84/93
Comp Wheel
80/108------112lbs/min
88/118------140lbs/min
Housings
T6 .96, 1.08, 1.23, 1.39
GT50
Turbine Wheel
91/99
Comp Wheel
81.5/118
Housings
TV8401
Turbine Wheel
97/108
Comp Wheel
84/117
Housings
T6 1.23
GT55
Turbine Wheel
102/111.5
Comp Wheel
84/123
88/118-----165lbs/min(GTX)
89/118.5---145lbs/min
91/133-----153lbs/min
91/133-----167lbs/min(GTX)
94/133-----160lbs/min
94/133-----181lbs/min(GTX)
106/141----185lbs/min
Housings
T6 1.0, 1.18, 1.24
GT60
Turbine Wheel
118/129.5
Comp Wheel
98/141
106/141-----185lbs/min
Housings
T6 1.25
G-Trim
Turbine Wheel
111/130
Comp Wheel
Housings
F-Trim
Turbine Wheel
106/130
Comp Wheel
Housings
Last edited by TravisG; 02-22-2013 at 04:36 PM.
Reason: Updated with Adam's new info
|
|
|
07-24-2012, 08:00 AM
|
#2
|
Name: Headcase98002
Title: Too Much Time
Status: Not Here
Join Date: Sep 2010
Location: Edinburgh, Indiana
Member`s Gallery
Posts: 1,631
|
Why don't we send you PM's so you can edit the first post. That way its all on the first page.
__________________
1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....
|
|
|
07-24-2012, 08:09 AM
|
#3
|
Name: ClamDigger4
Title: Too Much Time
Status: Not Here
Join Date: Feb 2010
Member`s Gallery
Posts: 1,733
|
Just edit as you go and it will be on first page.
from phone
|
|
|
07-24-2012, 03:25 PM
|
#4
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
It'll be pretty cluttered for a bit. Im sure there is a mod that is willing to edit the opening post as we go. Just gotta get some input first so he can copy paste.
|
|
|
07-24-2012, 07:29 PM
|
#5
|
Name: phatboy07
Title: Too Much Time
Status: Not Here
Join Date: Mar 2009
Location: Globe. Arizona
Member`s Gallery
Posts: 339
|
I measured my he341 at 56/58/9cm
-ViTO-
__________________
He341/GT4294, 215 pump, 5x14s, 4gsk, 22*
|
|
|
07-24-2012, 08:07 PM
|
#6
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
Quote:
Originally Posted by phatboy07
I measured my he341 at 56/58/9cm
-ViTO-
|
Do you have inducer exducer for each?
|
|
|
07-24-2012, 11:50 PM
|
#7
|
Name: phatboy07
Title: Too Much Time
Status: Not Here
Join Date: Mar 2009
Location: Globe. Arizona
Member`s Gallery
Posts: 339
|
Quote:
Originally Posted by AHall
Do you have inducer exducer for each?
|
Sure dont bud, but ill try to get them for ya
-ViTO-
__________________
He341/GT4294, 215 pump, 5x14s, 4gsk, 22*
|
|
|
07-24-2012, 11:53 PM
|
#8
|
Name: phatboy07
Title: Too Much Time
Status: Not Here
Join Date: Mar 2009
Location: Globe. Arizona
Member`s Gallery
Posts: 339
|
Also my gt42(94) has a t6 1.28 housing. ... I saw you only had a t4 1.28 listed
-ViTO-
__________________
He341/GT4294, 215 pump, 5x14s, 4gsk, 22*
|
|
|
07-25-2012, 12:07 AM
|
#9
|
Name: Tate
Title: What?
Status: Not Here
Join Date: Nov 2007
Location: Airdrie, Alberta
Member`s Gallery
Posts: 3,419
|
Gonna post the exducer size on the Garrett turbos? Keep in mind, the turbines are different between the GT37 and GT37R.
__________________
'98 3500 2wd, 24v, 5 spd, p-pumped
'98 2500 4wd, 12v, 6 spd, VP'd
'02 VW Jetta, 5 spd.
My p-pump conversion pics
|
|
|
07-25-2012, 12:25 AM
|
#10
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
Was just going to find the time to hand calculate it. Wasn't aware of them being different. All the same that i've seen.
|
|
|
07-25-2012, 11:19 AM
|
#11
|
Name: Headcase98002
Title: Too Much Time
Status: Not Here
Join Date: Sep 2010
Location: Edinburgh, Indiana
Member`s Gallery
Posts: 1,631
|
Ok the Hx40 turbine wheel is 73/64. The compressor I had was a 60/86.
My HT3B is 73.5/109 compressor, 97/86.3 turbine, 26 non-divided housing.
__________________
1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....
|
|
|
07-25-2012, 11:34 AM
|
#12
|
Name: TravisG
Title: #THEREALLAVONMILLER
Status: Not Here
Join Date: Aug 2006
Location: Colorado
Member`s Gallery
Posts: 6,799
|
Quote:
Originally Posted by AHall
It'll be pretty cluttered for a bit. Im sure there is a mod that is willing to edit the opening post as we go. Just gotta get some input first so he can copy paste.
|
Oh no, you started this gang bang. You just post what posts you want moved and I will check in every once in a while and move those.
__________________
R.I.P. Dex Brown
|
|
|
07-25-2012, 11:48 AM
|
#13
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
Appreciate it Travis. Promise this is for a good cause.
|
|
|
07-25-2012, 12:13 PM
|
#14
|
Name: crackerman
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Member`s Gallery
Posts: 1,800
|
The he351cw has an 86 mm comp exducer and flows 66-69 lb/min. That number is not accurate, as you will never find a compressor map.
|
|
|
07-25-2012, 12:18 PM
|
#15
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
I found a map on the 6 blade hx40 wheel
|
|
|
07-25-2012, 01:12 PM
|
#16
|
Name: crackerman
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Member`s Gallery
Posts: 1,800
|
351 is a 7 blade, similar to a super40 7 blade. so i guess that map may work for similar numbers.
|
|
|
07-25-2012, 02:38 PM
|
#17
|
Name: dieseljunkie
Title: Wasted Wages
Status: Not Here
Join Date: Dec 2007
Location: Littlestown, PA
Member`s Gallery
Posts: 1,068
|
Why no HX60?
__________________
02 24V HO, NorthEast P-pump, , E.D. inj, ED twins, O-ringed, ARP studs, P&P and Balanced by Advanced Engine.
Thanks,JWP Fab, E.D., Pure Diesel Power, GrandRock, Mumau Diesel,and Advanced Engine.
2010 FPP 2.6 points champion
2010 NADM 2.6 points champion
|
|
|
07-25-2012, 02:49 PM
|
#18
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
Id be happy to add it if someone has specs. That goes for other models as well.
|
|
|
07-25-2012, 03:04 PM
|
#19
|
Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
|
Please update post #1 with info from #21. Delete #7,12, 21, 22.
|
|
|
07-25-2012, 03:51 PM
|
#20
|
Name: AH64ID
Title: Too Much Time
Status: Not Here
Join Date: Dec 2008
Member`s Gallery
Posts: 883
|
GT35 turbine 68.0x62.3mm
GT37 turbine 72.5x64.0mm
GT40 turbine 77.0x68.0mm
GT42 turbine 82.0x75.2mm
GT45 turbine 87.0x80.2mm
GT47 turbine 92.7x83.9mm
GT55 turbine 111.5x102.2mm
GT60 turbine 129.5x118.7mm
The GT4094R and GT4294R both use the same 70.3x94.0mm comp wheel, ~84 lb/min
There are also the GTX wheels to add, in 35, 42, and 45.
__________________
2018 Ram 3500 CC LB Laramie - AISIN - Auto-Level - 5er Prep - RVK3600 - Titan Tank
Last edited by AH64ID; 07-25-2012 at 03:55 PM.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:20 AM.
|