06 5.9L Twins 62/80

wwm

wwm

TO MANY TRUCKS
Well here are the pictures of the Twin setup s362fmw over s480
Specs are 62fmw/68/.91ar T4 over an 80/96/1.32ar T6 then a Tial 44mm gate dumping to hotpipe.

:st:

Setup will spool at 20psi @ 1600 rpms in OD easing into it.
Setup hit 80psi for about 5 seconds before blowing off a boot.

Zirconium coating on the manifold, housing, and hot pipe. (thanks to Cradin Industries)

zirconiumcoating_zpsd48083b2.jpeg


Polished the housing on 80

polished80mm_zps16a3f823.jpeg


Steed Speed with New wastegate flange (custom made)

steedspeed_zps11392370.jpeg

process_zpsb8934701.jpeg

process2_zps47a64f96.jpeg

process2_zps47a64f96.jpeg

turbosin_zps559874ac.jpeg

withwastegate_zpsfa6f41cf.jpeg

topback_zpsfdac2cd5.jpeg

pipingfitment_zpscb4f4513.jpeg

finisheddriverside_zps2e32fdb5.jpeg


And Finished

finishedfinished_zps715c6954.jpg

farawayshot_zpscca37e22.jpg
 
Yes steed, redesigned their wastegated manifolds. This was his one of his first manifold with both the turbo flange angling upward and wastegate on top in the new location.

The is about 1/4 inch between the turbo and wastegate.

But steed is improving that and moving future manifolds more towards the head
 
You must log in or register to reply here.
Back
Top