Hoses and fittings

BBD Performance

BBD Performance

Awe Hell
Want to upgrade your fuel lines? Run twin turbos but need that hard to find oil line? Or maybe just want to run some sweet looking stainless hoses with Red, Blue, or Black fittings!

Then you need to call BBD Performance today!

We are now stocking all the popular fittings for Ford, Chevy, and Dodge!

From High PSI Stainless Braided Teflon to Low PSI Single Brade Rubber

We also have the hard to find High PSI BLACK stainless braided!

We carry all the major Manufactures Eaton, Airquip, RHP, and AKTC

Adapters, 90*, 45*, 90* Street, Banjo, SAE, JIC, if it can be screwed together we can do it!

All Hoses are made In-House! BBD can provide you with a full hose or parts to build your own! And as always if you find it cheaper let us know, we will not be beat!

Below 24V to S400
2011-04-28_15-34-56_668.jpg


Below 12V to HT3B
2011-04-28_15-33-50_790.jpg
 
Do you need to know measurements or do you pretty well have jigs to go off?? For example I just bought an s475 to do a twin setup on my LB7 and will need oil lines at somepoint
 
REW_388 said:
Do you need to know measurements or do you pretty well have jigs to go off?? For example I just bought an s475 to do a twin setup on my LB7 and will need oil lines at somepoint
Click to expand...


I know the S475 but will need to know the other end and I can always send you a few and you can try them out
 
Can I get a price for a 90* 1/2 push lock fitting, thread size m18x1.5 and just a standard straight push lock 1/2 inch, thread size m14x1.5, and a 90* bulk head fitting?

Also could I get a price on 20ft of 1/2inch fuel hose?
 
TRUBBS said:
Can I get a price for a 90* 1/2 push lock fitting, thread size m18x1.5 and just a standard straight push lock 1/2 inch, thread size m14x1.5, and a 90* bulk head fitting?

Also could I get a price on 20ft of 1/2inch fuel hose?
Click to expand...

You have a chance to put together a quote yet?
 
I would like to run a 1\2" line from my fass to a dual feed at the pump and i don't know the sizes for the fittings or lengths. would you happen to know these? And a price for it too?
 
jeff115 said:
I would like to run a 1\2" line from my fass to a dual feed at the pump and i don't know the sizes for the fittings or lengths. would you happen to know these? And a price for it too?
Click to expand...

The first two fittings I asked about are for dual feeding a p pump, the 45* is for the front plug and the second is for the one on the side
 
You must log in or register to reply here.
Back
Top