Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
Ford Competition and Performance General Ford Competition and Performance Discussion |
09-12-2014, 04:48 PM
|
#1
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
New Here!!! Heres my 04 6.0
Bailey Buckler from st marys county maryland. My goal last winter was to get into the 11s on fuel. Well went 11.86@113 1.65 60' at VMP!!! At MIRs big rigs had to use nitrous to spool the turbo at the line and then sprayed in through 2 gears and went 11.78@114 with a soft 60. If anyone has any question about the set up feel free to ask! And this is all on a STOCK MOTOR!!!! Trap speed puts me right at 750. Going to spray it 2 stages 54jets when it cools down and pray it holds. Chance are it won't. But that's my winter project to build the motor.
04 ccsb 6.0 7600lbs
RCD 285/150s
MPD s475/83/90
Suncoast built trans, billet flex and input
Caltracs
Livewire TS innovative tunes
Nx dual stage nitrous
Every other supporting mod you can think of.
I'm sure I'm forgetting something.
|
|
|
09-12-2014, 05:41 PM
|
#2
|
Name: Ford diesel girl
Title: aka Pinky aka Chemobioite
Status: Not Here
Join Date: Jun 2011
Member`s Gallery
Posts: 5,583
|
Welcome! Fellow 2004 6.0 owner here; stock and chugging along. Good luck with the project!
__________________
RIP Dexturd
6/2/2012
KCCO
Quote:
Originally Posted by Lostnwalmart
You do realize you're talking to a woman who ate the beating heart of a lion? Has knife fought grizzly bears and has a much bigger set of balls than you and your coal oraling self will ever have.
|
|
|
|
09-12-2014, 09:19 PM
|
#3
|
Name: 12vbuiltcummins
Title: Green Behind the Ears
Status: Not Here
Join Date: Jul 2014
Member`s Gallery
Posts: 33
|
Sounds like it is going to be fun!
__________________
93 ext cab short box - 4x4 - nv5600 - p pump - 5x14 - 60/74 compounds
|
|
|
09-13-2014, 10:28 PM
|
#4
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
It is fun drives pretty awesome considering the size of a charger. Rolling hills are the only time you can tell how big the charger is. Other then that can be driven smoke free and when she lites power is awesome.
|
|
|
09-13-2014, 10:28 PM
|
#5
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
Just need to send my spare motor away to get built just haven decide who yet
|
|
|
09-14-2014, 09:53 PM
|
#6
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
Anybody want to buy my 08-10 lariats and/or 305/55/20s 75%+ tread. 1500 for both or
600 for wheels
1000 for tires
|
|
|
09-14-2014, 09:58 PM
|
#7
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
Terra grapplers
|
|
|
09-15-2014, 07:47 AM
|
#8
|
Name: cmont58
Title: Yankee
Status: Not Here
Join Date: Apr 2010
Location: Corryton, TN
Member`s Gallery
Posts: 1,071
|
Welcome. Love to see someone with a 6.0 out making power.
__________________
05 6.0 F250 eclb, studded, deleted, Warren 205/100s, T4 up pipes, s366, tuned by Innovative.
|
|
|
09-15-2014, 07:56 AM
|
#9
|
Name: imelmo
Title: Go away, I'm 'batin'!
Status: Not Here
Join Date: Jun 2006
Location: Slidell, LA
Member`s Gallery
Posts: 8,878
|
Quote:
Originally Posted by Bushwood_6.0
Just need to send my spare motor away to get built just haven decide who yet
|
I've got mine at TSD right now getting built. The truck was originally there just for a re-stud, but when they pulled the heads the pistons were all wallered out. So I bit the bullet and went ahead and got some Hypermax rods while they were at it. Hoping it is ready by Worlds in a couple weeks but they're waiting on the Warren injectors to get there right now.
You're making on fuel almost exactly what I was making on nitrous.
.
__________________
ZMBYKLR, '03 Reg Cab Short Bed 4x4
Truck Source Diesel, Warren Diesel, Gardner Racing, Diesel Innovations, 1018 rear wheel llamathrust
10.38 @ 129.60mph
The FORDOTA, '86 Toyota reg cab tube chassis to be powered by a 6.0 Powerstroke; finally back in progress
.
|
|
|
09-17-2014, 04:38 PM
|
#10
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
I can't decide on hypermax or R&R from rcd or rivercity or getting it built by them or someone closer. Shipping would kill me.
|
|
|
09-17-2014, 04:39 PM
|
#11
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
Midwest**
|
|
|
09-19-2014, 04:41 PM
|
#12
|
Name: NELSON359
Title: trying to keep up
Status: Not Here
Join Date: Apr 2012
Location: maryland
Member`s Gallery
Posts: 803
|
Welcome to compD!! I think I've seen your truck before around here. You like creeping on the builds? Lol just messing with you.
Ps
I wouldn't try to sell your rims in this section, that's what the for sale section is for.
__________________
95 rclb 11.41 @120mph SOLD
|
|
|
10-20-2014, 07:07 AM
|
#13
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
New best 11.57@116 with a 54 jet
|
|
|
10-25-2014, 06:22 AM
|
#14
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
11.43@116
|
|
|
10-25-2014, 08:10 AM
|
#15
|
Name: imelmo
Title: Go away, I'm 'batin'!
Status: Not Here
Join Date: Jun 2006
Location: Slidell, LA
Member`s Gallery
Posts: 8,878
|
I think I'm gonna end up with an S475 on ZMBYKLR. Between what you're doing and Jesse Warren is doing I don't think I'll be able to resist.
.
__________________
ZMBYKLR, '03 Reg Cab Short Bed 4x4
Truck Source Diesel, Warren Diesel, Gardner Racing, Diesel Innovations, 1018 rear wheel llamathrust
10.38 @ 129.60mph
The FORDOTA, '86 Toyota reg cab tube chassis to be powered by a 6.0 Powerstroke; finally back in progress
.
|
|
|
10-28-2014, 12:20 PM
|
#16
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
You won't be disappointed. I would go with 75/87/1.0 bigger housing and exhaust wheel. Should run a little better fuel only. I just popped my turbo Friday. Probably going with an 80/87/.90.
|
|
|
10-30-2014, 01:18 PM
|
#17
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
80/87/1.0 on the way!!
|
|
|
10-30-2014, 01:18 PM
|
#18
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
Quote:
Originally Posted by imelmo
I think I'm gonna end up with an S475 on ZMBYKLR. Between what you're doing and Jesse Warren is doing I don't think I'll be able to resist.
.
|
Hopefully it lites
|
|
|
11-04-2014, 12:09 AM
|
#19
|
Name: Dawg2500HD
Title: Rookie
Status: Not Here
Join Date: Nov 2014
Member`s Gallery
Posts: 15
|
Been following your build on PSA! Wish I had made it to Rudy's to see it run!
|
|
|
11-05-2014, 05:20 PM
|
#20
|
Name: Bushwood_6.0
Title: Rookie
Status: Not Here
Join Date: Sep 2014
Member`s Gallery
Posts: 16
|
Quote:
Originally Posted by Dawg2500HD
Been following your build on PSA! Wish I had made it to Rudy's to see it run!
|
You didn't miss much at rudys except a crazy launch haha
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 03:54 AM.
|