Cflanery88
New member
Most swap the other way around but in my case I wanted the future option to run a 16” wheel for more drag slick options. With my trans out and brakes needing done I decided to put the carriage before the horse. Here is what’s needed:
1. 2001 or 2002 2nd gen or 3rd gen brake calipers (they are the same)
2. 01/02 brake caliper brackets
3. 01/02 2nd gen rotors
4. 01/02 2nd gen brake pads.
Only modifications needed is a little grinding on each caliper mount where it hits the steering knuckle. And for the rear some grinding on the calipers for wheel clearance (Havn’t gotten That far).
1. 2001 or 2002 2nd gen or 3rd gen brake calipers (they are the same)
2. 01/02 brake caliper brackets
3. 01/02 2nd gen rotors
4. 01/02 2nd gen brake pads.
Only modifications needed is a little grinding on each caliper mount where it hits the steering knuckle. And for the rear some grinding on the calipers for wheel clearance (Havn’t gotten That far).