Solidworks CAD/CAM Diesel Repository

Thanks for the info. I'm about to have a machine shop laser cut several of the T6 flanges out of stainless to make hot pipes. Would anyone else be interested in getting a few of the flanges? The more I get, the cheaper they'll be.

Sent from my DROID RAZR HD using Tapatalk
 
Print one out first to make sure it matches your turbo. I have a stack of scrap stainless CR exhaust port flanges that were a little too small.
 
joefarmer said:
Print one out first to make sure it matches your turbo. I have a stack of scrap stainless CR exhaust port flanges that were a little too small.
Click to expand...

I plan on it. I also plan to have them cut one out of a thin piece of mild steel just to be certain. The laser can cut up to 3/8" stainless. I believe that should be plenty thick enough. They'll face it afterwards to make sure it's flat. Anyone think differently?

Sent from my DROID RAZR HD using Tapatalk
 
Does anyone have the dimensions for the HX 40 half Marmon to weld into a downpipe?

Sent from the Big Ten Inch
 
Can one of you guys merge a T6 and T4 flange into one DXF for me? I am trying to learn Librecad and either I'm not good enough or there is a glitch in the software.
 
edrawings is also another free download available on solidworks website. It should view almost any 2D drawing as well and as far as I know, still free to download.
 
Does anyone happen to have a drawing of the deck of a 5.9 block? I'd like to try to make a torque/hone plate on my bridgeport. While I could measure my block it would save time if someone already had a file drawn. Thanks

Sent from my SM-G973U using Tapatalk
 
Bens said:
Does anyone happen to have a drawing of the deck of a 5.9 block? I'd like to try to make a torque/hone plate on my bridgeport. While I could measure my block it would save time if someone already had a file drawn. Thanks

Sent from my SM-G973U using Tapatalk
Click to expand...

Was a brief project of mine a year or two ago. Nobody within 200 miles seemed to have a torque plate to use on my build... Built the engine anyway caveman style.
Would still like this file. Might be useful for DIY deckplate.
 
You must log in or register to reply here.
Back
Top