07.5 6.7 Mega cab build

racin4broke

racin4broke

New member
Well since I finished and sold my previous build i suppose i should start the new one! It is already deleted with a tcm tune 2in drop shackles with 22x12s 305/40/22 Cooper tires.
db1b83100cad367556a0ee68066cd7df.jpg
28052de99e8a99b7fa42f04a4e547bb7.jpg
71b50c9e350e432dd574c7bf5fcf1e6a.jpg


Sent from my SM-N930V using Tapatalk
 
New tuning soon to come. Hopefully within the next fee months 2nd gen swap and a dual Cp3 kit drom industrial

Sent from my SM-N930V using Tapatalk
 
Very very clean inside and out which is exactly what i was looking for this is ultimately my dream pickup just needs some go fast parts..

5f8ebc4ea2feb783bff1cc59f24718ac.jpg
92750b24d6d60c752b21e1ea1b4589e4.jpg
95d3d2ea28c988d2cb1183657fd0199d.jpg
af434d24b274987521a6a027ffe4861b.jpg


Sent from my SM-N930V using Tapatalk
 
Been thinking about dropping my truck 2inches in the rear how does it seem with the shackles. Just debating on pulling the overload spring or drop shackles.
 
Well on the drive home. In Rapid City SD hit a deer truck will be sitting there till insurance figures out what to do putna hole in the intercooler.
732919a312dacf3cf5a4e58afac33dbd.jpg


Sent from my SM-N930V using Tapatalk
 
Love those tires. First saw them a few years back on a 4dr Jeep.

Sent from my Moto X using Tapatalk
 
OP, that's an awesome truck!! Looks like a great one to start building.


I just did drop shackles and removed the overload on mine for a total of 3" drop. Have to use a second gen airbag kit to make it work but it's well worth the effort, IMO. Still can haul and looks a ton better (excuse the grandpa steps).

6319109A-AEBA-4176-B13E-20390F9689E9_zpsuu6ay0zq.jpg


D1140473-80E3-40AB-8447-3E0C12D91164_zps2a6hes9c.jpg
 
I already have air bags on mine that would be my reasoning for pulling the overloads an it should ride better. I just like the looks of racin4broke's mega cab if I can get mine lowered an ride better but still b able to haul I'd be happy.
 
ndaniels said:
OP, that's an awesome truck!! Looks like a great one to start building.


I just did drop shackles and removed the overload on mine for a total of 3" drop. Have to use a second gen airbag kit to make it work but it's well worth the effort, IMO. Still can haul and looks a ton better (excuse the grandpa steps).

6319109A-AEBA-4176-B13E-20390F9689E9_zpsuu6ay0zq.jpg


D1140473-80E3-40AB-8447-3E0C12D91164_zps2a6hes9c.jpg
Click to expand...
Looks darn good! How do you like those caltracs?

Sent from my SM-N930V using Tapatalk
 
Cummins6.7trip said:
I already have air bags on mine that would be my reasoning for pulling the overloads an it should ride better. I just like the looks of racin4broke's mega cab if I can get mine lowered an ride better but still b able to haul I'd be happy.
Click to expand...
Mine doesnt have overloads depending on how it tows I may throw airbags on it.

Sent from my SM-N930V using Tapatalk
 
racin4broke said:
Looks darn good! How do you like those caltracs?

Sent from my SM-N930V using Tapatalk
Click to expand...

The Caltracs are awesome! Had them on a second gen reg cab 2wd before this truck. They just flat out work! Pia to install on the third gen, but that just because the factory leaf spring bushings are a pain to remove. Other than that they're not bad to install.

Cummins6.7trip- with the Firestone third gen airbag kit and drop shackles on my 2wd truck, it would bottom out easily (bags would bottom out). If it's a 4wd a guy could probably get away with it by changing the bracket over to the 2wd holes, but I couldn't gain anymore travel with mine without having to notch the frame. That was even before I pulled that thick bottom overload leaf out of the spring pack.
 
Looks like a truck my buddy eddy would own. He seemed to always paint the mirrors like that :hehe: truck looks good though. Sucks about hitting the deer.
 
You must log in or register to reply here.
Back
Top