Bassittk
New member
So when I'm at the strip, the truck launches pretty smoothly except every time it shifts it torque steers/pulls to the passenger side. I've been told that it acts like there is a limited slip up front because that can cause a similar issue but as far as I know it's stock.
That being said, it doesn't pull in 2wd. This past winter I removed the leveling kit, over load and one spacer out of the rear. And had the truck re aligned. Also over the winter I went to the 08.5+ steering w/ bilstein stabilizer, new shocks, and new ball joints. Track bar seemed to be tight still.
A buddy of mine also says my truck seem to dog track slightly with the bed going towards the passenger side. Not sure how or why it does that because I kept the alignment pin and re aligned everything when putting rear suspension back together.
As of now I'm out of town for 3 weeks for work so I'm trying to get an idea what I'll can look for to correct the issue. Thanks.
Sent from my iPhone using Tapatalk
That being said, it doesn't pull in 2wd. This past winter I removed the leveling kit, over load and one spacer out of the rear. And had the truck re aligned. Also over the winter I went to the 08.5+ steering w/ bilstein stabilizer, new shocks, and new ball joints. Track bar seemed to be tight still.
A buddy of mine also says my truck seem to dog track slightly with the bed going towards the passenger side. Not sure how or why it does that because I kept the alignment pin and re aligned everything when putting rear suspension back together.
As of now I'm out of town for 3 weeks for work so I'm trying to get an idea what I'll can look for to correct the issue. Thanks.
Sent from my iPhone using Tapatalk