adding sub to Uconnect 8.4 AN
thinking about putting an additional sub in the jeep to pick up the low end.
its a 2014 with the 8.4AN and 19 speaker HK system. it has a sub in the back, so if i understand correctly, i can tap into the speaker wire before the sub and use something like the LC2i to give me some RCA inputs for the amp.
Is this correct? i am a little dumb with these new systems. and if i don't have to pull the dash apart to get to the back of the radio module, all the better.
i found a schematic of the system, but what the heck is there 4 wires going to the sub for?
Last edited by baracuda; 10-05-2015 at 05:35 PM.
|