need help. jackars took the book.

ISBand4BT

ISBand4BT

New member
Well, we did have a Chrysler dodge ram repair manual here at the shop, but the jackwagon that works here during the day decided to take it home. Now that I'm done venting, does anyone know what the air gap on the crank sensor needs to be? Replies on here or texts are appreciated. 814-229-9321.

Tried searching... No luck. Prolly not the right wording. Who knows.
 
Hear is what the manual has in it, it does not have any adjustment that I can see
REMOVAL
(1) Raise and support vehicle
(2) Disconnect electrical connector at CKP sensor
(Fig. 12).
(3) Remove 1 sensor mounting bolt.
(4) Remove CKP sensor.
INSTALLATION
(1) Position and install CKP sensor to engine.
(2) Install 1 sensor mounting bolt. Refer to Torque
Specifications.
(3) Install electrical connector to CKP sensor (Fig.
12).
 
You must log in or register to reply here.
Back
Top