Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > The Starting Line > Drag Racing
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Drag Racing Where ALL Racers are Welcome- From ET Bracket, all the way to ProStreet and Top Diesel!

Closed Thread
 
Thread Tools
Old 06-20-2016, 10:34 PM   #1
79fordcrew

Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
1/8 mile 5 speed

I know there is a 1/4 mile list for manuals, but all I have for a strip near me is 1/8 mile.so let's post up some 1/8 mile times with a five speed. My best is a slow 9.32 at 76mph
 
Old 06-21-2016, 10:22 PM   #2
79fordcrew

Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
No one has times
 
Old 06-22-2016, 12:04 AM   #3
95taylor331
 
95taylor331's Avatar

Name: 95taylor331
Title: Gear Jammer
Status: Not Here
Join Date: May 2010
Location: Southwest, CO
Member`s Gallery
Posts: 178
I can't remember what my 1/8th time was, my 1/4th was 13.15 @112, I'll see if I can dig up the slip and post a pic of my 1/8th


Sent from the Moon via iPhone
__________________
94 2500,5 speed, 662hp-1403tq best 13.14 @112

01 3500, 260k miles, stock work truck
 
Old 06-22-2016, 06:22 AM   #4
atvracn08

Name: atvracn08
Title: Too Much Time
Status: Not Here
Join Date: Aug 2010
Location: .
Member`s Gallery
Posts: 294
Updated: From the thread on cummins forum

Name - E.T. & Trap, trans, 4wd or 2wd, weight, tire size, gear ratio, hp & tq dyno'd or estimated, clutch, engine(12v, PPump, VP 5.9 or 6.7 CR)
1/4 MILE

SRT6.7 - 11.857@126.1mph, gorilla56, 4x4 xxxx,305/50/20, 3.73, 1300hp+, triple disc gorilla, 6.7 CR
lvramcummins - 12.179@113.04, NV5600, 4x4, 7650lbs, 285/70/17, 3.73's, 787HP, Valair Triple Disc, 5.9CR
Dodge05CR - 12.276@111.16, G56, 4X4, 7100lbs, 285/65/18, 3.73, 700hp/1200tq, SBDD3600 6 button, 5.9 CR
gecoveyc - 12.540@113.56, NV5600, 4x4, 7400lbs, 33/13.5/18, xxx/xxxx, Valair Street Triple Disk, 5.9 CR
1SLO_CR - 12.543@111.51, G56, 4x4, 7100lbs, 325/60/18 Toyo A/T, 3.73, 838/1691, SBC 3600DD Diaphram solid hub, 5.9 CR
Broaner - 12.601@111.63, Cryo NV5600, 4x4, 7500lbs, 315/70/17, 3.73, 811/1583, Street Triple 3200 Diaphragm Plate, 5.9 CR
95civic2005 - 12.666@112.81, G56, 4x4, 8100lbs, 33/12.50/18, 4.10, 765/1245, SB 3850 DD, 5.9 CR
ramtd02 - 12.719@116.06, G56, 4x4, 7520, 35's, ?, 707/1255, Spec Twin Disc
Sandaholic - 12.861@107.39, NV5600, 4x4, 7700lbs, 305/60/17, 3.73's, 647/1180, Spec DD, 5.9 CR
DMX4SNX - 12.87@107, nv4500, 4x4, 7395lbs, 33x12.5R16.5 baja at, 3:73,446/968, ?
smoke machine - 12.88@104, g56, 4x4, 7800, 35/12.5/20, 3.73, ??????, valair tripledisc, 5.9 CR
Cummin_Get_Some - 12.90@102MPH, G56, 4x4, ?, ?, ?, ?, ?
RobertP - 12.92@108, G56, 4x4, 7350lbs, 33" AT's, ?, 650/?, SBC DD, 5.9 CR
Lostnwalmart - 13.07@98, nv4500, 4x4, 6000 ish, 305/60 r18's, 605/1357, Valair dd 4k pressure plate
coopercummins67 - 13.09@104.5, nv5600, 4x4, 8100lbs., bfg265's, ?, ?, ?
rtofflemire - 13.201@104.6, NV4500?, 4x4, ?, 265/75/16, ?, est. 600+, Power Parts Engineering solid hub dd, PPump 12v
MfolsomblueD - 13.25@103.4, NV5600, 4x4, ?, 33", 3.73, 543.9/1080, Valair cer/kev
Grapevine -13.47@100, nv5600 , 4x4, 7350#, 295/70/17, 3.55's, 482-802, valair ceramic DD street, VP44
smkin6spd - 13.49@105, NV5600, 4x4, 7300lbs., 33's, 3.55, 727/1440, SBC 3850 12CB rigid hub
Justin Price - 13.53@104.5, NV4500, 2wd dually, 6700lbs, 265/75/16, 3.55, 517/979, ?
brpcummins03 - 13.53@99.7, g56, 4wd, ?, 265's, 3.73, ?, stock ?
RAN '07 - 13.64@102, G56, 4x4, 7115lbs, nitto 235/60/18, ?, ?, SBC 3600
TTR 21 - 13.84@104, NV5600, 4x4, 7800lbs, 37/13.5/20, 4.10, 681/1200+, SB 3600 DD, 5.9 CR
mzcummins - 13.924@98.46, G56, 4x4, 7500lbs, 33/20's, 3.73, 504/1180, SBC 3600DD
MR4WLR - 13.949@96, NV5600, 4x4, 8200lbs, 35's, 3.73, ?, Haisley Street Puller, 5.9 CR
bgreen776 - 13.98@100.79, N5600, 4X4, 8500lbs (Dually), 235/80-17, 4.10, 667/1326, SB3250DD SFI Ceramic w/ bronze inlay
Mattlosch - 13.98@97, G56, 4x4, 7600lbs, 37/12.5/17, 3.73, Dyno'd 477/1092, Valair 360d0DD, 5.9 CR
ckassen - 13.98@104.5, NV5600, 2wd, 6450lbs, 285/70/16, 3.55, ?, single disk clutch
hightimes2 - 14.0@97, NV4500, 4x4, ?, 245/65/16's, 3.55, I would guess around 550hp, w/valair DD
ATP-Mike - 14.1 @ 106.8mph, G56, 4x4, 7xxxlbs, 275/65/18 Toyo A/T, 3.73 630-650HP, SBC OFE, 5.9 CR
boostn06Cummins - 14.15@102, G56, 4x4, 7100lbs, 315/70/17, 3.73, 436/1083, SBDD3600
EnduringAtlas - 14.242@104.93, G56, 4wd, 7400lbs, 285/70-17, 3.73, 580/valair 3800lb, 5.9CR
mudn_1 - 14.3 @104mph, nv5600, 4x4, 7300, 315/75r16, 3.55, ???/???, SB 3600 6cb, VP?
Atvracn08 - 14.32@99.18, NV4500, 4x4, ?, 265/70/16, 3.55, 481hp/1023tq, Valair Cer/Kev
dvt4u - 14.368@101.13, NV5600, 4x4, ?, 35's?, ?, ?, SBC 3600DD, VP
High Voltage - 14.384@95.14, G56, 4x4, 7800lbs?, 34's?, 3.42, 500/950?, Stock clutch?, 6.7
Motoracer057- 14.450 @ 94.72, G56, 4wd, 7600lb, 35/12.50/18, ?4.10s?, 447hp & 976tq, SBC 3250
Volcom18 - 14.447@93.56, G56, 4x4, 7855lbs, 325/65r18, 3.73's, 460/900, SBC 3600dd
K5Cruz - 14.469@96.58, G56, 4x4, 7480lbs, 33/12.50/18, 3.73, 458/941, Valair 12.25 Iron DD
jmd025 - 14.5@102, NV4500, 2wd, 6700, stock tires, 3.55, ?, Valair Kev/Cer Single
No23 - 14.5@100, NV4500, 4wd, 6400lbs, ?, ?, 568/1200, single disc
Maniac - 14.603@96.33, nv4500, 4x4, ?, 325/60/18, 3.55, ?, Valair DD
Sticker89- 14.605@97.98, G56, 4x4, 19.5 tires, 3.42 8300lbs, Valair DD
gschwepp - 14.606@94.76, g56, 4x4, 7400lbs with me in it, 285/70/17, 3.73s, 467/894, sbdd
v8440 - 14.67 at 98.00, nv4500, 2wd, 7000 with me, stock tire size, 3.54's, 450 hp and 920 ft/lbs dynod, sb 3850 dd
THE HAMMER - 14.70@91, NV5600, 4x4, 7600lbs, 35X12.5X17, 3.73, 580hp/1198tq, SBC DD4200
Leyerly1 - 14.75@92.70, G56, 4x4, 7800lbs, 35x20, ?, ?, SB DD 3600
shroyer702 - 14.805@93.53, nv5600, 4x4, ?, 285/65r18, 3.73, ?, Haisley Machine Street Drag
Futrao - 15.056 @ 108.14, G56, 4x4, 7600, 35's, 3.73, 715/1266, DD3600 Ceramic, 5.9 CR
dennhop - 15.090@86.91, NV4500, 4x4, ?, 315/75/16, 3.55, 506/1016, SBC CON OFE
jmd025 - 15.5@94, NV4500, 2wd, 6700, 32/12 M&H, 3.55, ?, Valair Kev/Cer Single
rockinj2000-15.669@89.10,G56,4x4,7600,235/75/17,3.73,hp+tq???,sbc ofe
Electric_Cowboy - 15.823@87.49, NV5600, 4x4, 7900lbs, 315/75/16, 3.55, 279/711, SBC CON OFE, VP
04.5bigred - 16.0@91, nv5600, 4x4, 7850lbs, 35/12.5/17, 3.73, ?, stock clutch CR
Matt 12 - 16.325@98, NV4500,4x4, ?, 285/75/16, 3.55, ?, Valair 3850 DD
9812v5spd - 16.51@83.5, nv4500, 4x4(ran in 2HI), 7800lbs, 395/75/16, 3.55, ?, south bend con ofe, PPump 12v


1/8 MILE

lvramcummins - 7.797@90.56, NV5600, 4x4, 7650lbs, 305/55/20, 3.73's, 787HP, Valair Triple Disc, 5.9CR
Dodge05CR - 7.857@87.06, G56, 4X4, 7100lbs, 285/65/18, 3.73, 700hp/1200tq, SBDD3600 6 button, CR
SRT6.7 - 7.901@97.43mph, gorilla56, 4x4 xxxx,305/50/20, 3.73, 1300hp+, triple disc gorilla, 6.7 CR
Jff24Gordn - 7.9271@90.371, NV4500, 4x4, est. 6500lbs, 285/75R16 Pro Comp AT, 3.54, est. 700-800hp, Haisley Drag Twin, PPump 12v?
1SLO_CR - 8.053@88.21, G56, 4x4, 7100lbs, 325/60/18 Toyo A/T, 3.73, 838/1691, SBC 3600DD solid hub, CR
gecoveyc - 8.09@89.09, NV5600, 4x4, 7400lbs, 33/13.5/18, xxx/xxxx, Valair Street Triple Disk, 5.9 CR
Broaner - 8.112@88.94, Cryo NV5600, 4x4, 7500lbs, 315/70/17, 3.73, (811/1583), Street Triple 3200 Diaphragm Plate, 5.9 CR
MfolsomblueD - 8.1@?, NV5600, 4x4, ?, 33", 3.73, 543.9/1080, Valair cer/kev, CR?
Sandaholic - 8.255@84.53 NV5600, 4x4, 7700lbs, 305/60/17, 3.73's, 647/1180, Spec DD, 5.9 CR
95civic2005 - 8.269@86.90, G56, 4x4, 8100lbs, 33/12.50/18, 4.10, 765/1245, SB 3850 DD, 5.9 CR
ramtd02 - 8.299@87.02, G56, 4x4, 7520, 35's, ?, 707/1255, Spec Twin Disc
gecoveyc - 8.3620@83.00, NV5600, 4x4, 8200lbs, 33/13.5/18, ?, ?, SBC sprung-hub 3600DD, 5.9 CR
operator62 - 8.45@82.57, g56, 4x4, 8000lbs?, 255/80/17, 3.73, 550/1100 Est, South Bend DD
rtofflemire - 8.539@83.73, NV4500?, 4x4, ?, 265/75/16, ?, est. 600+, Power Parts Engineering solid hub dd, PPump 12v?
Boostn06Cummins - 8.553@82, G56, 4x4, 7100lbs?, 315/70/17, 3.73, 436/1083, 3600DD, 5.9 CR
Woosley - 8.58@81.5, G56, 4x4, 7450lbs, 285 75r17, 3.73, 574/1248, South Bend 3600, 5.9 CR
Grapevine -8.65@82, nv5600 , 4x4, 7350#, 295/70/17, 3.55's, 482-802, valair ceramic DD street, VP44
8UPRACIN - 8.689@82.14, NV5600, 4X4, 7980, 305/50R20, 3.54, 591/1275, SB3600DD, VP?
RAN '07 - 8.699@81.00, G56, 4x4, 7115lbs, nitto 235/60/18, ?, ?, SBC 3600, 5.9 CR
smkin6spd - 8.730@79.63, NV5600, 4x4, 7300lbs., 33's, 3.55, 727/1440, SBC 3850 12CB rigid hub
Tyler irvin - 8.73@79, NV5600, 4x4, ?, 35/12.5/20, ?, 553/1025?, valair sd?
Mitchellfried - 8.78 @ 83.5, G56, 4WD, 8111, 34", 3.73, 846/1456, Valair Triple, 5.9
Cnp22 - 8.822 @ 76.96, getrag, 2wd, ?, 29.5/10.5-15s, 3.55, estimated 400hp, valair single disk
Boostn06Cummins - 8.826@80.78, G56, 4x4, 7100lbs?, 315/70/17, 3.73, 4336/1083, 3600DD, 5.9 CR
mzcummins - 8.868@79.27, G56, 4x4, 7500lbs, 33/20's, 3.73, 504/1180, SBC 3600DD
yoda - 8.99@79.88, G56, 4x4, 7452lbs, hankook 305/55/20, ?, ?, SBC 3250
bgreen776 - 9.05@76.8, N5600, 4X4, 8500lbs (Dually), 235/80-17, 4.10, 667/1326, SB3250DD SFI Ceramic w/ bronze inlay
High Voltage - 9.214@75.42, G56, 4x4, 7800lbs?, 34's?, 3.42, 500/950?, Stock clutch?, 6.7
Atvracn08 - 9.24@74, NV4500, 4x4, ?, 305/70/16, 3.55, 481hp/1023tq, Valair Cer/Kev
Motoracer057- 9.263 @ 76.34, G56, 4wd, 7600lb, 35/12.50/18, ?4.10s?, 447hp & 976tq, SBC 3250
K5Cruz - 9.36@77, G56, 4x4, 7480lbs, 33/12.50/18, 3.73, 458/941, Valair 12.25 Iron DD
gschwepp - 9.392@76.52 g56, 4x4, 7400lbs with me in it, 285/70/17, 3.73s, 467/894, sbdd
EnduringAtlas - 9.414@81.47, G56, 4wd, 7400lbs, 285/70-17, 3.73, 580/valair 3800lb, 5.9CR
taterbob01- 9.41@77.34, NV5600,4x4, ?, 315/75/16, 3.55, ? ?, valair ceramic single
THE HAMMER - 9.42@74.03, NV5600, 4x4, 7600lbs, 35X12.5X17, 3.73, 580hp/1198tq, SBC DD4200
dvt4u - 9.45@78.41, NV5600, 4x4, ?, 35's?, ?, ?, SBC 3600DD, VP
shroyer702 - 9.501@74.96, nv5600, 4x4, ?, 285/65r18, 3.73, ?, Haisley Machine Street Drag
Maniac - 9.506@77.61, nv4500, 4x4, ?, 325/60/18, 3.55, ?, Valair DD
Leyerly1 - 9.55@76, G56, 4x4, 7800lbs, 35x20, ?, ?, SB DD 3600
Volcom18 - 9.595@71.36, G56, 4x4, 7855lbs, 325/65r18, 3.73's, 460/900, SBC 3600dd
dennhop - 9.623@74.09, NV4500, 4x4, ?, 315/75/16, 3.55, 506/1016, SBC CON OFE
jmd025 - 9.635@82.16, NV4500, 2wd, 6700, stock tires, 3.55, ?, Valair Kev/Cer Single
Farm_Kid_Diesel - 9.885@74.07, nv4500, 4x4(ran in 2HI), 7500lbs, 285/75/16, 3.55, 328HP/964, ceramic single disk Valair
Justin Price - 9.970@81.89, NV4500, 2wd dually, 6700lbs, 265/75/16, 3.55, 517/979, ?
pipeliner_dodge - 10.2092@73.51, nv5600, 4wd, ?,265/70/17, 4.10, ?/?, sb3600dd
Electric_Cowboy - 10.263@69.78, NV5600, 4x4, 7900lbs, 315/75/16, 3.55, 279/711, SBC CON OFE, VP
Matt 12 - 11.027@68, NV4500,4x4, ?, 285/75/16, 3.55, ?, Valair 3850 DD
 
Old 06-23-2016, 12:02 AM   #5
79fordcrew

Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
What gear should I try leaving in in a NV 4500 I usually do second with a non boosted launch. Just rev and dump is what I do. Any thoughts or help
 
Old 06-23-2016, 06:23 AM   #6
jlbayes
 
jlbayes's Avatar

Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
4th if you have the power and clutch to hold it. I would be very leery of leaving in 3rd.
__________________
Jacob, 97 rclb
 
Old 06-24-2016, 12:33 AM   #7
79fordcrew

Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
Why leery of leaving in third
 
Old 06-24-2016, 11:55 AM   #8
Tx tyre fryer
 
Tx tyre fryer's Avatar

Name: Tx tyre fryer
Title: Diesel Enthusiast
Status: Not Here
Join Date: Oct 2015
Location: Texas
Member`s Gallery
Posts: 102
Weaker than 2nd and 4th
__________________
Ronnie
94 12 valve
 
Old 06-24-2016, 12:20 PM   #9
jlbayes
 
jlbayes's Avatar

Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
3rd is on the counter shaft. Go boom.
__________________
Jacob, 97 rclb
 
Old 06-24-2016, 01:18 PM   #10
CREED1
 
CREED1's Avatar

Name: CREED1
Title: Throwed Off
Status: Not Here
Join Date: Jul 2007
Location: Cleveland, Tx
Member`s Gallery
Posts: 2,880
Cummins forum??? This is comp d we have a list already.
 
Old 06-24-2016, 01:18 PM   #11
CREED1
 
CREED1's Avatar

Name: CREED1
Title: Throwed Off
Status: Not Here
Join Date: Jul 2007
Location: Cleveland, Tx
Member`s Gallery
Posts: 2,880
Quote:
Originally Posted by atvracn08 View Post
Updated: From the thread on cummins forum



Name - E.T. & Trap, trans, 4wd or 2wd, weight, tire size, gear ratio, hp & tq dyno'd or estimated, clutch, engine(12v, PPump, VP 5.9 or 6.7 CR)

1/4 MILE



SRT6.7 - 11.857@126.1mph, gorilla56, 4x4 xxxx,305/50/20, 3.73, 1300hp+, triple disc gorilla, 6.7 CR

lvramcummins - 12.179@113.04, NV5600, 4x4, 7650lbs, 285/70/17, 3.73's, 787HP, Valair Triple Disc, 5.9CR

Dodge05CR - 12.276@111.16, G56, 4X4, 7100lbs, 285/65/18, 3.73, 700hp/1200tq, SBDD3600 6 button, 5.9 CR

gecoveyc - 12.540@113.56, NV5600, 4x4, 7400lbs, 33/13.5/18, xxx/xxxx, Valair Street Triple Disk, 5.9 CR

1SLO_CR - 12.543@111.51, G56, 4x4, 7100lbs, 325/60/18 Toyo A/T, 3.73, 838/1691, SBC 3600DD Diaphram solid hub, 5.9 CR

Broaner - 12.601@111.63, Cryo NV5600, 4x4, 7500lbs, 315/70/17, 3.73, 811/1583, Street Triple 3200 Diaphragm Plate, 5.9 CR

95civic2005 - 12.666@112.81, G56, 4x4, 8100lbs, 33/12.50/18, 4.10, 765/1245, SB 3850 DD, 5.9 CR

ramtd02 - 12.719@116.06, G56, 4x4, 7520, 35's, ?, 707/1255, Spec Twin Disc

Sandaholic - 12.861@107.39, NV5600, 4x4, 7700lbs, 305/60/17, 3.73's, 647/1180, Spec DD, 5.9 CR

DMX4SNX - 12.87@107, nv4500, 4x4, 7395lbs, 33x12.5R16.5 baja at, 3:73,446/968, ?

smoke machine - 12.88@104, g56, 4x4, 7800, 35/12.5/20, 3.73, ??????, valair tripledisc, 5.9 CR

Cummin_Get_Some - 12.90@102MPH, G56, 4x4, ?, ?, ?, ?, ?

RobertP - 12.92@108, G56, 4x4, 7350lbs, 33" AT's, ?, 650/?, SBC DD, 5.9 CR

Lostnwalmart - 13.07@98, nv4500, 4x4, 6000 ish, 305/60 r18's, 605/1357, Valair dd 4k pressure plate

coopercummins67 - 13.09@104.5, nv5600, 4x4, 8100lbs., bfg265's, ?, ?, ?

rtofflemire - 13.201@104.6, NV4500?, 4x4, ?, 265/75/16, ?, est. 600+, Power Parts Engineering solid hub dd, PPump 12v

MfolsomblueD - 13.25@103.4, NV5600, 4x4, ?, 33", 3.73, 543.9/1080, Valair cer/kev

Grapevine -13.47@100, nv5600 , 4x4, 7350#, 295/70/17, 3.55's, 482-802, valair ceramic DD street, VP44

smkin6spd - 13.49@105, NV5600, 4x4, 7300lbs., 33's, 3.55, 727/1440, SBC 3850 12CB rigid hub

Justin Price - 13.53@104.5, NV4500, 2wd dually, 6700lbs, 265/75/16, 3.55, 517/979, ?

brpcummins03 - 13.53@99.7, g56, 4wd, ?, 265's, 3.73, ?, stock ?

RAN '07 - 13.64@102, G56, 4x4, 7115lbs, nitto 235/60/18, ?, ?, SBC 3600

TTR 21 - 13.84@104, NV5600, 4x4, 7800lbs, 37/13.5/20, 4.10, 681/1200+, SB 3600 DD, 5.9 CR

mzcummins - 13.924@98.46, G56, 4x4, 7500lbs, 33/20's, 3.73, 504/1180, SBC 3600DD

MR4WLR - 13.949@96, NV5600, 4x4, 8200lbs, 35's, 3.73, ?, Haisley Street Puller, 5.9 CR

bgreen776 - 13.98@100.79, N5600, 4X4, 8500lbs (Dually), 235/80-17, 4.10, 667/1326, SB3250DD SFI Ceramic w/ bronze inlay

Mattlosch - 13.98@97, G56, 4x4, 7600lbs, 37/12.5/17, 3.73, Dyno'd 477/1092, Valair 360d0DD, 5.9 CR

ckassen - 13.98@104.5, NV5600, 2wd, 6450lbs, 285/70/16, 3.55, ?, single disk clutch

hightimes2 - 14.0@97, NV4500, 4x4, ?, 245/65/16's, 3.55, I would guess around 550hp, w/valair DD

ATP-Mike - 14.1 @ 106.8mph, G56, 4x4, 7xxxlbs, 275/65/18 Toyo A/T, 3.73 630-650HP, SBC OFE, 5.9 CR

boostn06Cummins - 14.15@102, G56, 4x4, 7100lbs, 315/70/17, 3.73, 436/1083, SBDD3600

EnduringAtlas - 14.242@104.93, G56, 4wd, 7400lbs, 285/70-17, 3.73, 580/valair 3800lb, 5.9CR

mudn_1 - 14.3 @104mph, nv5600, 4x4, 7300, 315/75r16, 3.55, ???/???, SB 3600 6cb, VP?

Atvracn08 - 14.32@99.18, NV4500, 4x4, ?, 265/70/16, 3.55, 481hp/1023tq, Valair Cer/Kev

dvt4u - 14.368@101.13, NV5600, 4x4, ?, 35's?, ?, ?, SBC 3600DD, VP

High Voltage - 14.384@95.14, G56, 4x4, 7800lbs?, 34's?, 3.42, 500/950?, Stock clutch?, 6.7

Motoracer057- 14.450 @ 94.72, G56, 4wd, 7600lb, 35/12.50/18, ?4.10s?, 447hp & 976tq, SBC 3250

Volcom18 - 14.447@93.56, G56, 4x4, 7855lbs, 325/65r18, 3.73's, 460/900, SBC 3600dd

K5Cruz - 14.469@96.58, G56, 4x4, 7480lbs, 33/12.50/18, 3.73, 458/941, Valair 12.25 Iron DD

jmd025 - 14.5@102, NV4500, 2wd, 6700, stock tires, 3.55, ?, Valair Kev/Cer Single

No23 - 14.5@100, NV4500, 4wd, 6400lbs, ?, ?, 568/1200, single disc

Maniac - 14.603@96.33, nv4500, 4x4, ?, 325/60/18, 3.55, ?, Valair DD

Sticker89- 14.605@97.98, G56, 4x4, 19.5 tires, 3.42 8300lbs, Valair DD

gschwepp - 14.606@94.76, g56, 4x4, 7400lbs with me in it, 285/70/17, 3.73s, 467/894, sbdd

v8440 - 14.67 at 98.00, nv4500, 2wd, 7000 with me, stock tire size, 3.54's, 450 hp and 920 ft/lbs dynod, sb 3850 dd

THE HAMMER - 14.70@91, NV5600, 4x4, 7600lbs, 35X12.5X17, 3.73, 580hp/1198tq, SBC DD4200

Leyerly1 - 14.75@92.70, G56, 4x4, 7800lbs, 35x20, ?, ?, SB DD 3600

shroyer702 - 14.805@93.53, nv5600, 4x4, ?, 285/65r18, 3.73, ?, Haisley Machine Street Drag

Futrao - 15.056 @ 108.14, G56, 4x4, 7600, 35's, 3.73, 715/1266, DD3600 Ceramic, 5.9 CR

dennhop - 15.090@86.91, NV4500, 4x4, ?, 315/75/16, 3.55, 506/1016, SBC CON OFE

jmd025 - 15.5@94, NV4500, 2wd, 6700, 32/12 M&H, 3.55, ?, Valair Kev/Cer Single

rockinj2000-15.669@89.10,G56,4x4,7600,235/75/17,3.73,hp+tq???,sbc ofe

Electric_Cowboy - 15.823@87.49, NV5600, 4x4, 7900lbs, 315/75/16, 3.55, 279/711, SBC CON OFE, VP

04.5bigred - 16.0@91, nv5600, 4x4, 7850lbs, 35/12.5/17, 3.73, ?, stock clutch CR

Matt 12 - 16.325@98, NV4500,4x4, ?, 285/75/16, 3.55, ?, Valair 3850 DD

9812v5spd - 16.51@83.5, nv4500, 4x4(ran in 2HI), 7800lbs, 395/75/16, 3.55, ?, south bend con ofe, PPump 12v





1/8 MILE



lvramcummins - 7.797@90.56, NV5600, 4x4, 7650lbs, 305/55/20, 3.73's, 787HP, Valair Triple Disc, 5.9CR

Dodge05CR - 7.857@87.06, G56, 4X4, 7100lbs, 285/65/18, 3.73, 700hp/1200tq, SBDD3600 6 button, CR

SRT6.7 - 7.901@97.43mph, gorilla56, 4x4 xxxx,305/50/20, 3.73, 1300hp+, triple disc gorilla, 6.7 CR

Jff24Gordn - 7.9271@90.371, NV4500, 4x4, est. 6500lbs, 285/75R16 Pro Comp AT, 3.54, est. 700-800hp, Haisley Drag Twin, PPump 12v?

1SLO_CR - 8.053@88.21, G56, 4x4, 7100lbs, 325/60/18 Toyo A/T, 3.73, 838/1691, SBC 3600DD solid hub, CR

gecoveyc - 8.09@89.09, NV5600, 4x4, 7400lbs, 33/13.5/18, xxx/xxxx, Valair Street Triple Disk, 5.9 CR

Broaner - 8.112@88.94, Cryo NV5600, 4x4, 7500lbs, 315/70/17, 3.73, (811/1583), Street Triple 3200 Diaphragm Plate, 5.9 CR

MfolsomblueD - 8.1@?, NV5600, 4x4, ?, 33", 3.73, 543.9/1080, Valair cer/kev, CR?

Sandaholic - 8.255@84.53 NV5600, 4x4, 7700lbs, 305/60/17, 3.73's, 647/1180, Spec DD, 5.9 CR

95civic2005 - 8.269@86.90, G56, 4x4, 8100lbs, 33/12.50/18, 4.10, 765/1245, SB 3850 DD, 5.9 CR

ramtd02 - 8.299@87.02, G56, 4x4, 7520, 35's, ?, 707/1255, Spec Twin Disc

gecoveyc - 8.3620@83.00, NV5600, 4x4, 8200lbs, 33/13.5/18, ?, ?, SBC sprung-hub 3600DD, 5.9 CR

operator62 - 8.45@82.57, g56, 4x4, 8000lbs?, 255/80/17, 3.73, 550/1100 Est, South Bend DD

rtofflemire - 8.539@83.73, NV4500?, 4x4, ?, 265/75/16, ?, est. 600+, Power Parts Engineering solid hub dd, PPump 12v?

Boostn06Cummins - 8.553@82, G56, 4x4, 7100lbs?, 315/70/17, 3.73, 436/1083, 3600DD, 5.9 CR

Woosley - 8.58@81.5, G56, 4x4, 7450lbs, 285 75r17, 3.73, 574/1248, South Bend 3600, 5.9 CR

Grapevine -8.65@82, nv5600 , 4x4, 7350#, 295/70/17, 3.55's, 482-802, valair ceramic DD street, VP44

8UPRACIN - 8.689@82.14, NV5600, 4X4, 7980, 305/50R20, 3.54, 591/1275, SB3600DD, VP?

RAN '07 - 8.699@81.00, G56, 4x4, 7115lbs, nitto 235/60/18, ?, ?, SBC 3600, 5.9 CR

smkin6spd - 8.730@79.63, NV5600, 4x4, 7300lbs., 33's, 3.55, 727/1440, SBC 3850 12CB rigid hub

Tyler irvin - 8.73@79, NV5600, 4x4, ?, 35/12.5/20, ?, 553/1025?, valair sd?

Mitchellfried - 8.78 @ 83.5, G56, 4WD, 8111, 34", 3.73, 846/1456, Valair Triple, 5.9

Cnp22 - 8.822 @ 76.96, getrag, 2wd, ?, 29.5/10.5-15s, 3.55, estimated 400hp, valair single disk

Boostn06Cummins - 8.826@80.78, G56, 4x4, 7100lbs?, 315/70/17, 3.73, 4336/1083, 3600DD, 5.9 CR

mzcummins - 8.868@79.27, G56, 4x4, 7500lbs, 33/20's, 3.73, 504/1180, SBC 3600DD

yoda - 8.99@79.88, G56, 4x4, 7452lbs, hankook 305/55/20, ?, ?, SBC 3250

bgreen776 - 9.05@76.8, N5600, 4X4, 8500lbs (Dually), 235/80-17, 4.10, 667/1326, SB3250DD SFI Ceramic w/ bronze inlay

High Voltage - 9.214@75.42, G56, 4x4, 7800lbs?, 34's?, 3.42, 500/950?, Stock clutch?, 6.7

Atvracn08 - 9.24@74, NV4500, 4x4, ?, 305/70/16, 3.55, 481hp/1023tq, Valair Cer/Kev

Motoracer057- 9.263 @ 76.34, G56, 4wd, 7600lb, 35/12.50/18, ?4.10s?, 447hp & 976tq, SBC 3250

K5Cruz - 9.36@77, G56, 4x4, 7480lbs, 33/12.50/18, 3.73, 458/941, Valair 12.25 Iron DD

gschwepp - 9.392@76.52 g56, 4x4, 7400lbs with me in it, 285/70/17, 3.73s, 467/894, sbdd

EnduringAtlas - 9.414@81.47, G56, 4wd, 7400lbs, 285/70-17, 3.73, 580/valair 3800lb, 5.9CR

taterbob01- 9.41@77.34, NV5600,4x4, ?, 315/75/16, 3.55, ? ?, valair ceramic single

THE HAMMER - 9.42@74.03, NV5600, 4x4, 7600lbs, 35X12.5X17, 3.73, 580hp/1198tq, SBC DD4200

dvt4u - 9.45@78.41, NV5600, 4x4, ?, 35's?, ?, ?, SBC 3600DD, VP

shroyer702 - 9.501@74.96, nv5600, 4x4, ?, 285/65r18, 3.73, ?, Haisley Machine Street Drag

Maniac - 9.506@77.61, nv4500, 4x4, ?, 325/60/18, 3.55, ?, Valair DD

Leyerly1 - 9.55@76, G56, 4x4, 7800lbs, 35x20, ?, ?, SB DD 3600

Volcom18 - 9.595@71.36, G56, 4x4, 7855lbs, 325/65r18, 3.73's, 460/900, SBC 3600dd

dennhop - 9.623@74.09, NV4500, 4x4, ?, 315/75/16, 3.55, 506/1016, SBC CON OFE

jmd025 - 9.635@82.16, NV4500, 2wd, 6700, stock tires, 3.55, ?, Valair Kev/Cer Single

Farm_Kid_Diesel - 9.885@74.07, nv4500, 4x4(ran in 2HI), 7500lbs, 285/75/16, 3.55, 328HP/964, ceramic single disk Valair

Justin Price - 9.970@81.89, NV4500, 2wd dually, 6700lbs, 265/75/16, 3.55, 517/979, ?

pipeliner_dodge - 10.2092@73.51, nv5600, 4wd, ?,265/70/17, 4.10, ?/?, sb3600dd

Electric_Cowboy - 10.263@69.78, NV5600, 4x4, 7900lbs, 315/75/16, 3.55, 279/711, SBC CON OFE, VP

Matt 12 - 11.027@68, NV4500,4x4, ?, 285/75/16, 3.55, ?, Valair 3850 DD


Cummins forum??? This is comp d we have a list already.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:44 PM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com