Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > The Starting Line > Competition Vehicle Build Tech > Injectables; Water, Meth, Nitrous, Ect.
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 01-19-2014, 05:38 PM   #1
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
NXD1000 with no nozzle

I bought an NXD1000 progressive kit off Amazon without knowing anything about it, it was sitting in my cart and I got a message that there was two left and they were going for $373! so I snatched it up.

Now I want to install it, but I'm confused. The two stage system comes with nozzles and jets. This single stage system has no nozzles, no jets, and only one -3 an braided line that's bout 10 feet long.

Should I just run the solenoid right into my intake manifold and run the -3 line from the bottle all the way to the solenoid? (its a .093 solenoid)
Attached Images
File Type: jpg IMG_1540.jpg (50.6 KB, 0 views)
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Old 01-19-2014, 07:41 PM   #2
COMP461
 
COMP461's Avatar

Name: COMP461
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Apr 2006
Location: Aledo
Member`s Gallery
Posts: 4,009
I worked to develope that system. I never used jets , and that is a small solinoid anyway . just plum in in to you intercooler tank, as far away from the intake as possable. if you need any help on the programing pm me , their teck calls use to come to my cell phone on that system
 
Old 01-19-2014, 10:07 PM   #3
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
Thanks Greg, you speaking of this system on here was the reason it was in my cart. When I put it in there it was almost $1000, so I never purchased it, but at $373 I couldn't pass it up!

Why so far from the intake?
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Old 01-19-2014, 10:14 PM   #4
COMP461
 
COMP461's Avatar

Name: COMP461
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Apr 2006
Location: Aledo
Member`s Gallery
Posts: 4,009
To allow the nitrous to change completely from a cryogenic liquid to a gas, and absorb as much heat as possible. I also like for the nitrous to homogenize with the air flow.
I use the power stage on the cold side of the intercooler , and the boost ramp up stage on the hot side
 
Old 01-19-2014, 10:20 PM   #5
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
Good to know, thank you.

Since mine is a single stage kit, should I install it pre-CAC?

Will it be possible to program a spooling function, and a power function with only one solenoid?
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Old 01-19-2014, 10:26 PM   #6
COMP461
 
COMP461's Avatar

Name: COMP461
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Apr 2006
Location: Aledo
Member`s Gallery
Posts: 4,009
Quote:
Originally Posted by bgreen776 View Post
Good to know, thank you.

Since mine is a single stage kit, should I install it pre-CAC?

Will it be possible to program a spooling function, and a power function with only one solenoid?



yes there is, give me a call, ill explain how , your going to need a bigger solinoid

. I use only nitrous outlet . There are abit bigger and made of stainless , but they dont stick or fail to open when you bottle pressure is high.
 
Old 01-19-2014, 10:58 PM   #7
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
Awesome, I'll call you this week. In the mean time I will look at my options for installing the solenoid in the Pre-CAC tube and in the CAC end tanks.

__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Old 01-24-2014, 12:24 AM   #8
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
I found a brand new NOS wet kit for sale locally and was able to pick it up for a song, so I figure I have a few options. The attached picture is the wiring diagram I drew up to use the NOS solenoid for boost assistance, and the NX kit for the rest. Tear it up if you want, its just thought at this point. I'm always open to other options, and willing to try many different setups to see which one I like best. The NOS kit did come with several jets, the biggest was a .093, I can't remember off hand what the smallest jet was.

Click the image to open in full size.

Click the image to open in full size.
Attached Images
File Type: jpg IMG_1580.jpg (50.4 KB, 0 views)
File Type: jpg IMG_1576.jpg (50.3 KB, 0 views)
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Old 01-24-2014, 12:47 AM   #9
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
Comp461 gave me a great idea that I am going to wire up as well, if he wants it online I'll draw it up as well, then maybe he can explain how it works.
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis

Last edited by bgreen776; 01-24-2014 at 12:50 AM.
 
Old 01-24-2014, 01:29 AM   #10
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
Link to better picture of diagram

Please let me know if the link doesn't work, I'm new to Skydrive.
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Old 01-24-2014, 01:28 PM   #11
COMP461
 
COMP461's Avatar

Name: COMP461
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Apr 2006
Location: Aledo
Member`s Gallery
Posts: 4,009
looks good , but you need to set the full throttle switch at about 20 %

good you got some reliable solinoids , the aluminum one are prone to not working when you have the bottle pressure above 1000 psi
 
Old 01-24-2014, 05:04 PM   #12
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
Okay, thank you. I'm not quite sure how I can mount that throttle switch to engage at 20%, but I have a couple ideas. Anyone have a picture of theirs?

I only have one SS solenoid, I still need to have you send me one for the power solenoid.
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Old 01-24-2014, 05:33 PM   #13
COMP461
 
COMP461's Avatar

Name: COMP461
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Apr 2006
Location: Aledo
Member`s Gallery
Posts: 4,009
use the throttle learn , use a multimeter, and look where you foot brake. then set that voltage at a little before that .
 
Old 02-25-2014, 01:10 PM   #14
nskyline34

Name: nskyline34
Title: Green Behind the Ears
Status: Not Here
Join Date: Apr 2013
Member`s Gallery
Posts: 42
Looking to put a progressive NX kit on my 2001. Want a little more to get me to the 700 mark (super b over S475 with weston's 6x.013's and an SOVP). Thinking only a 50 or 100 shot at most. Sub'd!
__________________
2001 2500 QC/LB 4x4, NV5600, compounds, 6x.013's, SOVP, 6 spd, Goin' Pullin' !!!
 
Old 02-25-2014, 07:42 PM   #15
bgreen776
 
bgreen776's Avatar

Name: bgreen776
Title: White Collar Fabricator
Status: Not Here
Join Date: Jul 2012
Location: Kenai, AK
Member`s Gallery
Posts: 578
With a progressive kit you just run a wide open solenoid, and dial back the amount of n20 by adjusting the pulse width with the included software.
__________________
Project "Smokem" a 2wd journey into the 8's?

'03 2wd - 66/483|Coffman UDC|BBi Stg 3's|34" M/T's|Fab9|4link|25.5 SFI Chassis
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:07 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com