Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
Exterior Care Wash, Wax, Paint, Body, Buffing, and Polishing. |
09-12-2015, 03:14 PM
|
#1
|
Name: Bosshawg600
Title: PDP.com FireFighter
Status: Not Here
Join Date: Aug 2006
Location: Monticello,In
Member`s Gallery
Posts: 3,651
|
Anyone done a Vinal Wrap?
So after a few years, my paint has seen better days. So in looking at all kinds of options and different Ideas, ive been researching doing a wrap. I talked with a shop locally, and the said for a full color it will run around $4K while a paint job for my truck is about 2500-3K. To me being an older truck with higer miles.... not really worth throwing that much money into it. And I dont need any body work, so a paint job is not needed, just wanted.
Ive looked into wraps just due to the fact that its easily repairable if I do get a scratch, ding or whatever.... just re-wrap that body panel. Biggest thing I like, is I can change colors or what every pretty easily and to buy enough wrap its only 250 bucks or so, so not very expensive.
I thought it might be a good late winter project to do right before spring or around then. Plus Im tired of looking at my dull, faded and peeling clear coat!!!
__________________
2011 Ram Mega, Because my old bones need Comfort!
|
|
|
09-12-2015, 03:33 PM
|
#2
|
Name: zstroken
Title: For $$$ your name here
Status: Not Here
Join Date: Sep 2006
Location: Western Michigan(by the lake)
Member`s Gallery
Posts: 23,151
|
I dont understand your questions, are you saying you can buy the materials for $250 and wrap it yourself?
i am betting for $250 the wrap is junk, and would work great on a semi trailer or something with very few curves. putting it on a vehicle with lots of curves will be challenging with a cheap wrap.
__________________
2008 4x4 Megacab, 68RFE
97 Dodge gone....
24V P-Pump Mafia member #1(retired)
Thanks to Mumau Diesel, Goerend Transmission, Northeast Diesel Service!
Last edited by zstroken; 09-12-2015 at 03:35 PM.
|
|
|
09-13-2015, 02:11 AM
|
#3
|
Name: B_Bail
Title: *
Status: Not Here
Join Date: Nov 2011
Member`s Gallery
Posts: 193
|
Plasti-Dip
|
|
|
09-13-2015, 07:50 AM
|
#4
|
Name: zfaylor
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Nov 2010
Location: P-TOWN!, Indiana
Member`s Gallery
Posts: 5,024
|
Paint it.
Nothing else is quite the same. Plus nothing is cost effective. I had $700 in materials to paint my truck and that included a cab corner.
If you have no desire to paint but want to save some coin you can get the paint sprayed. Do the prep work yourself, strip the truck, take it to get sprayed. I am sure you could find somebody at a body shop to moonlight it for you for cheap.
I wouldn't do vinyl and definitely not plasti dip. I wish the auto world never discovered that stuff. Great for small parts, terrible for a vehicle.
__________________
2015 half ton heavy chevy
81 Fairmont LS project
Many yard ornament projects...
North American Turbo
|
|
|
09-13-2015, 09:36 AM
|
#5
|
Name: Bosshawg600
Title: PDP.com FireFighter
Status: Not Here
Join Date: Aug 2006
Location: Monticello,In
Member`s Gallery
Posts: 3,651
|
Quote:
Originally Posted by B_Bail
Plasti-Dip
|
Nope
Quote:
Originally Posted by zstroken
I dont understand your questions, are you saying you can buy the materials for $250 and wrap it yourself?
i am betting for $250 the wrap is junk, and would work great on a semi trailer or something with very few curves. putting it on a vehicle with lots of curves will be challenging with a cheap wrap.
|
The wrap itself is cheap, not cheap quality. Its not hard to find or get. My prices were based on 3M film on a rough estimate for the Square Feet that will be needed. Ive seen a few wraps and they dont look bad at all, heck most of the time its hard to tell its not paint. Best thing I like, if it starts looking like crap, it just peels off and back to origional paint. And being a Regular cab truck, there arent too many chalenging parts, just lots of flat areas.
I thought about buying a little bit and wrapping a few less noticeable parts to see how it looks and how it holds up before I do the entire truck.
Quote:
Originally Posted by zfaylor
Paint it.
Nothing else is quite the same. Plus nothing is cost effective. I had $700 in materials to paint my truck and that included a cab corner.
If you have no desire to paint but want to save some coin you can get the paint sprayed. Do the prep work yourself, strip the truck, take it to get sprayed. I am sure you could find somebody at a body shop to moonlight it for you for cheap.
I wouldn't do vinyl and definitely not plasti dip. I wish the auto world never discovered that stuff. Great for small parts, terrible for a vehicle.
|
I agree, nothing beats paint, Im just looking at different options. Hopefully soon this truck is just going to be a "Fun Toy" and be DDing something else, so a nice paint job isnt super high on the list of "needs".
__________________
2011 Ram Mega, Because my old bones need Comfort!
|
|
|
09-13-2015, 09:50 AM
|
#6
|
Name: TheBac
Title: UPS guy
Status: Not Here
Join Date: Oct 2009
Location: Mid Michigan
Member`s Gallery
Posts: 2,344
|
I think you could easily add a "0" to your $250 in order to get a bare bones-quality vinyl wrap done. A new paint job be cheaper (and better) in the long run.
__________________
Tom
"BBT" -- 2003 GMC CC/SB 4x4 12.14@111.15
"KLESHAY" -- 2000 C5 Corvette -- the toy
2017 Buick Regal 2.0T -- the DD
|
|
|
09-13-2015, 11:22 AM
|
#7
|
Name: Bosshawg600
Title: PDP.com FireFighter
Status: Not Here
Join Date: Aug 2006
Location: Monticello,In
Member`s Gallery
Posts: 3,651
|
Quote:
Originally Posted by TheBac
I think you could easily add a "0" to your $250 in order to get a bare bones-quality vinyl wrap done. A new paint job be cheaper (and better) in the long run.
|
More like add a 0 and double that!!! A graphics company I talked to said solid color wraps are 4-5K!!!! For some reason solid colors are more expensive then graphics..... Im talking buying the wrap straight from the factory and wraping myself. The wrap is cheap, it just takes time to get it all on. Thinking it would be a cool, fun project to do and not being permenant like paint, hard to mess up bad.
__________________
2011 Ram Mega, Because my old bones need Comfort!
|
|
|
09-13-2015, 11:55 AM
|
#8
|
Name: zstroken
Title: For $$$ your name here
Status: Not Here
Join Date: Sep 2006
Location: Western Michigan(by the lake)
Member`s Gallery
Posts: 23,151
|
Quote:
Originally Posted by Bosshawg600
Nope
The wrap itself is cheap, not cheap quality. Its not hard to find or get. My prices were based on 3M film on a rough estimate for the Square Feet that will be needed. Ive seen a few wraps and they dont look bad at all, heck most of the time its hard to tell its not paint. Best thing I like, if it starts looking like crap, it just peels off and back to origional paint. And being a Regular cab truck, there arent too many chalenging parts, just lots of flat areas.
I thought about buying a little bit and wrapping a few less noticeable parts to see how it looks and how it holds up before I do the entire truck.
I agree, nothing beats paint, Im just looking at different options. Hopefully soon this truck is just going to be a "Fun Toy" and be DDing something else, so a nice paint job isnt super high on the list of "needs".
|
I would be curious where you can get the 3M wrap for a complete vehicle for $250. There is alot of chinese counterfeit out there.
__________________
2008 4x4 Megacab, 68RFE
97 Dodge gone....
24V P-Pump Mafia member #1(retired)
Thanks to Mumau Diesel, Goerend Transmission, Northeast Diesel Service!
|
|
|
09-13-2015, 01:33 PM
|
#9
|
Name: Bosshawg600
Title: PDP.com FireFighter
Status: Not Here
Join Date: Aug 2006
Location: Monticello,In
Member`s Gallery
Posts: 3,651
|
Amazon sells a lot of it, along with private other companies. Figuring up Sq. Ft. needed is probably the hard part. But before I do the entire truck, I would do a few pannels as a test.
Id like to go with something differnt, and a Matte color is what Im wanting, and everyone knows paint a matte color is HARD!!! Thus the wrap idea.... much easier, cheaper and safer.
__________________
2011 Ram Mega, Because my old bones need Comfort!
|
|
|
09-17-2015, 04:44 PM
|
#10
|
Name: wolpert83
Title: Rookie
Status: Not Here
Join Date: May 2015
Member`s Gallery
Posts: 2
|
Line-x it...no washing or waxing just power wash and you're good to go..and u don't have to worry about scratches
|
|
|
09-17-2015, 05:57 PM
|
#11
|
Name: Bustedknuckles
Title: Honey Badger
Status: Not Here
Join Date: Jul 2009
Location: Hagerstown, MD
Member`s Gallery
Posts: 1,778
|
__________________
2004 Lb7: 06 front clip, Idaho-Rob tunes , PPE trans, ML converter, Airdog, ARP head studs, s366.
|
|
|
09-17-2015, 06:01 PM
|
#12
|
Name: zfaylor
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Nov 2010
Location: P-TOWN!, Indiana
Member`s Gallery
Posts: 5,024
|
I assume vinyl is much more difficult than tint. If that is in fact the case then I wouldn't attempt vinyl personally. Some things are worth paying for.
__________________
2015 half ton heavy chevy
81 Fairmont LS project
Many yard ornament projects...
North American Turbo
|
|
|
09-18-2015, 08:05 AM
|
#13
|
Name: Bosshawg600
Title: PDP.com FireFighter
Status: Not Here
Join Date: Aug 2006
Location: Monticello,In
Member`s Gallery
Posts: 3,651
|
Quote:
Originally Posted by zfaylor
I assume vinyl is much more difficult than tint. If that is in fact the case then I wouldn't attempt vinyl personally. Some things are worth paying for.
|
ya, i agree there! I just bought some of the cheaper stuff in a small sheet to lay a bit down to guage how i like it, how it will look and decide from there..... Ill see how this goes and also decide if I want to tackle the job or not!
__________________
2011 Ram Mega, Because my old bones need Comfort!
|
|
|
09-18-2015, 09:22 AM
|
#14
|
Name: aka_chewy
Title: Green Behind the Ears
Status: Not Here
Join Date: Aug 2010
Location: Minnesota
Member`s Gallery
Posts: 78
|
What's kind of vinyl is it? Actual vinyl for wrapping has some technology built in for air release so you don't get bubbles. That's why the good stuff costs so much. The basic intermediate vinyl will be tough to get bubble free and to conform to curves. A heat gun and lots of application fluid will help....and lots of time.
|
|
|
09-18-2015, 11:13 AM
|
#15
|
Name: JD Dearden
Title: Too Much Time
Status: Not Here
Join Date: Jan 2007
Member`s Gallery
Posts: 3,193
|
My bumpers are done. I would do it a similar color to the truck so when it chips you cant tell.
|
|
|
09-18-2015, 05:28 PM
|
#16
|
Name: Bosshawg600
Title: PDP.com FireFighter
Status: Not Here
Join Date: Aug 2006
Location: Monticello,In
Member`s Gallery
Posts: 3,651
|
Quote:
Originally Posted by aka_chewy
What's kind of vinyl is it? Actual vinyl for wrapping has some technology built in for air release so you don't get bubbles. That's why the good stuff costs so much. The basic intermediate vinyl will be tough to get bubble free and to conform to curves. A heat gun and lots of application fluid will help....and lots of time.
|
Its Vivid brand, just something cheap to do some testing on. Its suposidly bubble free, but we will see.
If I like it, I have an idea of Square foot it will take and order the right amount of 3M vynal and do it propperly.
__________________
2011 Ram Mega, Because my old bones need Comfort!
|
|
|
09-18-2015, 06:19 PM
|
#17
|
Name: 97$moker
Title: Hukt on fonix wurkt fr me
Status: Not Here
Join Date: Sep 2013
Location: St. George Ut
Member`s Gallery
Posts: 770
|
https://m.facebook.com/XtremeGraphix...pe=1&source=42
This is one of the owners of a graphics company here, I would like to do one with colors kinda like that. They do alot of badazz wraps.
__________________
97 sc/lb 4x4, k&n, 100 plate, afc mods, DPC triple disk, darren built vb, more to come
|
|
|
11-16-2015, 02:19 PM
|
#18
|
Name: HightechRedneck
Title: Too Much Time
Status: Not Here
Join Date: Mar 2010
Location: Northeast Ohio
Member`s Gallery
Posts: 2,753
|
Im going to revive this thread. I did my car in Vvivid 8 gloss black on the roof. Its easier than window tint. I'm doing a full car wrap this winter to it. watch a few videos and go from there. I would spend the extra 100 to 200 on getting avery or 3m 1080. they are easier to work with and lay nicer.
__________________
Dustin
Bagged 00 Jetta big turbo TDI - DRTY DZL
Bagged 03 Jetta Wagon TDI - DALY DZL
07 Dodge Ram Dually 12v swapped g56 - HULN DZL
ISSPRO GAUGES, XS BATTERY DÜRTY DZL PERFORMANCE
|
|
|
11-16-2015, 03:30 PM
|
#19
|
Name: SHughes
Title: Too much is never enough!
Status: Not Here
Join Date: Jan 2008
Location: Bellevue, NE
Member`s Gallery
Posts: 9,267
|
I hate it when you guys make me thinking of **** I don't need to do.
__________________
Quote:
Originally Posted by Joesixpack
That statement just reduced the collective IQ of the entire forum.
|
|
|
|
11-16-2015, 07:00 PM
|
#20
|
Name: GOT-Torque
Title: is
Status: Not Here
Join Date: Jul 2007
Location: Falls City, NE
Member`s Gallery
Posts: 5,284
|
I had the pulling truck done with a vinyl wrap, actually helped him put it on. The fender flares and sport bumper were a PITA! The rest wasn't too bad. He was new at it and it shows, but it was heavily discounted. Looks great from the stands which is all I was after, otherwise I would of had it professionally painted.
__________________
"Enjoy the little things in life, because one day you will look back, and realize they were the big things"
EATSOOT.com
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 07:27 PM.
|