COMP461
Comp Diesel Sponsor
I will be running a large number of MaxSpool 2.5++ and 3.0 this week, if anyone if wanting a custom grind the cost is exactly the same during these runs .
All of these cams will be drilled and tapped for bolt of gear retain , which is available at no cost if you will need it , IE big P pumps and ultra high RPMs
Call if you need help on a custom cam,
You can get these cams thu
The authorized dealers
Dr Performance,
Industrial Injection
Pure Diesel Power
Diesel Nut Motorsports
I have a few grinds that are wild , and proven , with big lifts to work with ported cylinder heads .
I have lobe lift valves up to .400 whick on a 24 / Common rail will give gross lifts at the valve of .550
These cams make real power up to 6000+ rpms and require Dual springs and Custom push rods , yet are mild enough to drive every day on in a pro street application
All of these cams will be drilled and tapped for bolt of gear retain , which is available at no cost if you will need it , IE big P pumps and ultra high RPMs
Call if you need help on a custom cam,
You can get these cams thu
The authorized dealers
Dr Performance,
Industrial Injection
Pure Diesel Power
Diesel Nut Motorsports
I have a few grinds that are wild , and proven , with big lifts to work with ported cylinder heads .
I have lobe lift valves up to .400 whick on a 24 / Common rail will give gross lifts at the valve of .550
These cams make real power up to 6000+ rpms and require Dual springs and Custom push rods , yet are mild enough to drive every day on in a pro street application
